Wondering about scale vs gauge? You’re not alone. It’s a common question, and I’ll try to provide a simple answer. The two terms may appear interchangeable, but they aren’t quite.
The Lionel 675 and its brothers, the Lionel 2025 and Lionel 2035, are among the best locomotives Lionel ever made. That said, they still need maintenance from time to time. That usually requires you to disassemble them. Here’s a guide to Lionel 675 disassembly that also applies to the 2025 and 2035.
If you want to fix a Lionel train, what you probably really need to do is repair a Lionel train motor. There isn’t much to the rest of the train.
The motors tend to be pretty rugged and they’ve held up over the years. Most “repairs” are really more of a clean and service job, not unlike taking your car in for an oil change. Here are some general principles to follow when you clean and service a Lionel motor.
Sakai trains were made in HO and O gauge by a Tokyo-based manufacturer and sold abroad, particularly in the United States and Australia after World War II. Sakai’s O gauge product bore a curious resemblance to Marx. I have read speculation that Marx once used Sakai as a subcontractor, and Sakai used the tooling to make its own trains rather than returning it to Marx, but there are enough differences that I don’t think that’s the case.
What I do know is that Sakai’s O gauge product was a curious blend of cues from Lionel and Marx and the trains worked pretty well. They’re hard to find today, but not especially valuable since few people know what they are. They turn up on Ebay occasionally.
I had a Marx 999 that didn’t run well when I pulled it out of storage. When pushing it along the track a few times didn’t yield any measurable improvement, I decided I’d better take it apart and give it a thorough cleaning.
In this case, I worked on a Marx 999, but everything I did applies to any other O gauge train Marx made except for the very late 490 locomotives, whose motors don’t seem to have been designed to let you do any more than replace the brushes.
The Lionel 675, 2025 and 2035 locomotives are three of the most iconic and sought-after engines Lionel produced in the postwar era. They depicted the Pennsylvania K-5, an ill-fated 4-6-2 Pacific locomotive that was intended to replace the iconic K-4, a popular locomotive that had roamed the rails for one of the largest railroads in the United States since 1911, and was later recognized as the official state locomotive of Pennsylvania. Unfortunately, the K-5 proved less successful and only two were ever made, although the PRR did run both of them into the 1950s.
Some documents identify the 675/2025/2035 as a K-4, but Lionel’s own service literature from the period says it was a K-5.
Lionel’s version proved far, far more successful than the real thing, almost becoming an icon itself. The first edition of Krause’s Standard Catalog of Lionel Trains, 1945-1969 featured a Lionel 675 from 1946 on its cover.
Someone asked me recently about the Lionel CW-80 and how it compares vs older transformers. That’s a fair question, and one that tends to stir up a lot of emotions on train forums. So I’ll try to present the pros and cons in a fair manner.
Your Lionel 675 light does not work, you say? Mine didn’t either, but the fix was really simple. You might not even need any parts.
I took my family to a train show–The Great Train Expo–this past weekend. I’ve been going to shows for about 8 years or so, and while we had fun, I ended up not spending any of the money I brought with me. At least not on myself. I think I have an idea why. There’s a difference between local and traveling train shows.