Convert a list of hostnames to a list of IP addresses

I had a client with a huge list of hostnames that they needed to convert to IP addresses so they could scan them. That’s common. I used to have a Windows batch file to convert a list of hostnames to a list of IP addresses, so I dug it out of my archives. This uses ping but isn’t like a ping sweep; they knew the machine names but their tool needed IPs.

I used the file to resolve lists of machines so I could load them into a centralized logging or vulnerability management system. This client had the same need and nobody there had a similar tool. So I shared mine with them. And I present it here so I won’t lose it again, and if you need it, you can use it too.

Read more

History of overclocking

History of overclocking

Overclocking didn’t start in the 90s, and it wasn’t limited to PCs either. Here’s a history of overclocking from a guy who did it some, and talked to guys who did it a lot in the 80s.

I don’t recommend overclocking, and today Microsoft can prove it’s a bad idea. But overclocking has a long and colorful history. It’s less common than it used to be, perhaps. But it’s not completely extinct.

Read more

Repair Lionel ZW binding posts cheaply

Repair Lionel ZW binding posts cheaply

If your Lionel ZW or VW transformer lights up and hums but doesn’t output any voltage on one or more of its pairs of binding posts, there’s a good chance one or more of the binding posts is bad. It’s possible to repair Lionel ZW binding posts cheaply.

By far the most failure prone part of the Lionel ZW and VW is the binding posts where the wires connect to your track. Fortunately, there’s a workaround that works sometimes. But if you want something better than a workaround, a proper repair is cheap and not difficult.

Read more

Fix gaps in vinyl tile or planks

Fix gaps in vinyl tile or planks

Sometimes, no matter how careful you are in cutting, measuring, and placing peel and stick vinyl floor tile, you end up with a gap somewhere. Fortunately, there is a pretty easy way to fix gaps in vinyl tile or planks.

This trick also works to disguise the edges if your floor turned out not to be perfectly flat and a little bit of a vinyl floor tile’s edge shows.

Read more

Keep Marx sliding couplers from hanging up

Keep Marx sliding couplers from hanging up

In Marx’s cheapest sets, it utilized cars that had sliding couplers with only a twist holding them in place. The end of the coupler had a couple of tabs, and a twist secured them without any additional parts.

The problem is, sometimes this twist catches the slot wrong when going around a turn and gets stuck. Then the cars derail as the train comes out of the curve. That’s probably not what you want.

Here’s a cheap, easily reversible modification to keep them from hanging up.

Read more

D-Link vs TP-Link

D-Link vs TP-Link

If you’re looking for the pros and cons of D-Link vs TP-Link, I have experience with both and I’m glad to share it.

D-Link is a well established brand. Founded in 1986, it started doing business as D-Link in 1994. It’s been around a long time. If you’ve been involved with computers for any length of time, you’ve probably heard of it.

I don’t blame you if you’ve never heard of TP-Link. They were founded in 1996 but if you were buying their stuff before 2005, you’re well ahead of me.

Read more