american flyer

Setting up the tree and the train

Dave Farquhar Toy trains , , , , , , , , , , ,

Although some of the people in our neighborhood had their Christmas stuff up well in advance of Thanksgiving, my wife and I did the traditional thing, setting the tree up the day after Thanksgiving. We use a pre-lit artificial tree. Growing up, I remember stringing lights on the tree and taking them back down was always the most tedious part of the job, so I decided that if someone didn’t invent it before me, I’d invent the pre-lit Christmas tree.

Someone else did, of course. The next time I get a great idea I need to move on it more quickly.

Read more

Cars (as in vehicles) for train layouts

Dave Farquhar Toy trains , , , , , , , , , , , , , , , , ,

I was at Kmart today, and as I usually do, I wandered down the toy aisle on the off chance I might find some cars that might work on my train layout.

I did a lot better than I usually do–Jada and Maisto came through for me.I won’t talk about HO and N scale trains because for those scales, you can walk in to any hobby shop in the country and find pretty much anything you want. Us Lionel and American Flyer fans have it a lot tougher.

Lionel O scale is roughly 1:48. You won’t find 1:48 vehicles anywhere these days, but you can find 1:43 and 1:50. Some people fret that 1:43 is way too big, but sometimes you can hold up one maker’s 1:43 vehicle next to a similar 1:50 vehicle from another make and find they’re just about the same size. Maisto and New Ray are two makes of cars that size.

Lionel and Marx O27 is 1:64, more or less. Maisto, Jada, and Ertl make lots of 1:64 cars. Some Hot Wheels and Matchbox cars are close, but most are closer to 1:72, which is a bit small.

American Flyer O gauge trains made after 1937 are 1:64 scale, and all American Flyer S gauge trains are 1:64.

Since I run O27, I have lots of vehicles to choose from, but the problem is finding something era-appropriate. Contemporary vehicles are no problem to find, but if you want something old, it’s hard to find much other than a ’57 Chevy. Well, you can find a handful of late ’50s cars of various makes, but it tends to lean towards the late ’50s, and from looking at the stuff in the diecast aisle, you would think Ford and GM were the only two companies making cars in the ’50s. Want a Studebaker or a Hudson or (gasp) a Dodge? Good luck.

Of course I had to make things more difficult. I like really old trains, so a ’57 Chevy isn’t exactly going to cut it. I need 1930s and 1940s cars.

Maisto just happens to be offering a 1:64 ’36 Ford Coupe as part of its G Ridez series. It has homey-ized rims and thin tires, but other than that, it looks pretty stock. Hot Wheels has offered a ’36 Ford since I was a little kid, but it was always a hotrod.

Maisto also offers a ’37 Ford, but it has a prominently chopped roof

And Jada is offering a 1:64 ’39 Chevy Master Deluxe as part of its Dub City Old Skool line. Like the Maisto, it has thin tires and weird rims, but aside from that, it looks stock, and it’s black. This is a very nice car to have because it’s a late 1930s station wagon–a family car. It looks just like the cars you see families using in the movies set in the ’30s and ’40s. I hope I can find a few more of these because it’s the kind of ordinary car that will look natural even if I had several on the layout.

So if your toy train preferences lean towards American Flyer S gauge or Lionel or Marx O27, a trip down the toy aisle at your local Kmart or Target would probably be a good idea.

One thing I’ve learned is that I have to be patient. Usable cars are out there, but there may only be a handful of them issued every year–including anything Mattel releases under the Hot Wheels or Matchbox brands, undersize or not. I take what I can get. But improving the layout a little bit at a time over the course of years is part of the hobby’s appeal. At least it’s supposed to be.

My $8 secondhand Lionel

Dave Farquhar Toy trains , , , , , , , , ,

I hear stories all the time about the Lionel train that someone found at a garage sale for $10. Or sometimes it’s a Marx. The one that bothered me the most was the story about a 65-year-old American Flyer locomotive for $10, and the guy who got it didn’t even like O gauge.

Whatever. Today was my day. I found a Lionel starter set from 1999. The price marked on it: $8. I didn’t haggle. I handed over Alexander Hamilton, scooped up the train set, grabbed a couple of Washingtons, and headed to the car with a train set under my arm.For $8, I didn’t expect much. But I knew the locomotive alone was worth that. I got it home this afternoon and looked it over.

It was a set Lionel made for Keebler: The Keebler Elfin Express. Nope, no real railroad names on this set. The locomotive was cast from the same Scout mold that Lionel has been using for its starter sets since the early 1950s. But this one had a 4-wheel truck up front, making it a 4-4-2 Atlantic.

The cars are traditional 6464-sized: a boxcar and a flat car. The boxcar advertises Keebler products, and the flat has a cardboard load of, you guessed it, Pillsbury products. Nope, more Keebler.

The same traditional SP-style caboose that Lionel has been using since the early ’50s brings up the rear.

It didn’t look like the set had seen much use. The instructions were long gone, but a lot of the accessories are still on the plastic sprue. The lockon was on the track and the transformer was wired to it, so I knew it had been used a little. I set it up on a loop of O27 track and let it rip. It ran nicely. To my surprise, the locomotive has smoke, and the tender has a whistle, so the train smokes and whistles. Not bad for 8 bucks.

A couple of the track pieces were bent, as if they’d been stepped on. I can fix them. For the price I paid, I’m not going to complain. I’d be able to get clean used O27 curves for a dime or a quarter each at the Boeing Employee Model Railroad Club show in September. But I’ve got plenty of O27 curves in my basement. Those things breed.

It took me forever to find the lockout switch for the reverse on the bottom of the locomotive. At first I figured it had no reverse, but looking at the underside, I noticed it had a lot of electronics in it–far more than would be needed just to convert the AC current from the transformer to the DC current the can motor needed. (Yes, Lionel builds a lot of inefficiencies into its modern equipment to keep it compatible with the old stuff–and that drives up cost.) Finally I found the switch, unlocked it, and the locomotive gained neutral and reverse capabilities.

I don’t mess around with modern-issue Lionel much. I like the old stuff. But for 8 bucks, I won’t be picky.

Recapturing the charm of someone else’s dad’s American Flyer train

Dave Farquhar Toy trains , , , , , , , ,

My buddy Todd brought over his dad’s American Flyer train today. It had been a gift from his dad on his first Christmas. It was from 1938.

That was a peculiar year, because it was the first year that A.C. Gilbert, of Erector fame, built American Flyer trains. Previously American Flyer had been an independent company in Chicago.

This model was a Gilbert design, and at most produced from 1938 to 1941.Late last year, Todd had asked our mutual friend Tom about how to go about getting the train repaired. Tom referred Todd to me, since 3-rail O gauge isn’t Tom’s specialty. Of course Tom knew the answer: Marty Glass, of Marty’s Model Railroads in Affton.

So Todd took it to Marty earlier this year, once the Christmas rush had died down. Todd called me yesterday and said Marty had finished it. He brought it over.

I wasn’t sure what to expect, but he brought out an intricate 4-6-4 Pacific. It had far more detail than anything Marx ever made, and far more detail than any O27 locomotive Lionel ever made too. It had an intricate set of linkages, which turned out to be its downfall because they got bound up on us once. Marty had run the train for Todd when he picked it up–I suggested Todd have him do that, since 68-year-old trains always need some adjustments after they’ve been repaired. It ran fine on Marty’s layout.

Before we ran the train, I fixed the light in the Pullman car Todd brought over. He hadn’t taken that to Marty. The wire had come loose from the pickup on the underside of the car, and the light bulb was rattling around inside. I fished the bulb out, examined it (it looked fine; the old light bulbs in these trains is almost always fine, even after being shipped across the country), put the bulb in the socket, and re-soldered the wire to the pickup. I solder like a plumber, but judging from the pickup on that train, so did the Gilbert employee who built it.

With the car ready to go, I put it and the locomotive and tender on the track. We quickly found that the oddball American Flyer link and pin couplers didn’t line up right. Time for some more adjustments. I finally got the coupler heights adjusted correctly, then I hit the power, expecting since it had run in the store, it would run just fine on my layout.

Not so much. It ran for a few feet, then stopped in a shower of blue sparks, leaving a buzzing sound on the layout that I’ve come to associate with a short circuit.

The handrails were the biggest problem. There are two holes in the cowcatcher assembly that the handrails are supposed to slide into. Had I been doing the design, I would have made the rails longer, so they could be bent further underneath. But that’s irrelevant now. With the handrails not in the holes, they were pushing the cowcatcher down low, there it could short out the third rail. S gaugers can gloat that this wouldn’t be a problem on 2-rail S gauge track, but they really ought to respect their elders.

So I fixed the rails, and put a dab of solder on the underside to hold them in place (solder won’t stick to the zamac boiler). I noted the Phillips head screws Marty used to put it all back together. I’ll have to give him a hard time about that the next time I see him. Phillips screws didn’t come into widespread use on toys until the ’50s.

With that problem taken care of, it ran, but then it locked up hard. I gave it another thorough examination, and found that some of the intricacies on the drive rods had come misaligned, causing it all to bind up. I had to take it apart to free up enough space to realign everything. I took off the front truck, then the cowcatcher, guided everything where it was supposed to go, and reassembled everything.

And what do you know… It ran. It was a bit herky-jerky at first, but in my experience, old motors are always that way when they’ve been sitting for decades. They seem to need to get some running time in before they get used to running smoothly again. Todd told me that Marty said the motor was fine; the only problems he found were structural. From the sound of the motor, Marty obviously had lubed it–they tend to squeal a lot after 50 years, let alone 68, and this motor sounded like new–but I guess that’s all it had needed.

I found out the hard way that this locomotive (an American Flyer 531) really hates O27 curves. It derails every time, even on curves where you lead into the O27 and back out with a wider curve. So we moved it from my inner loop to my outer loop, which is mostly O42 except in one corner, where I had to do O34 to make everything fit. It made me nervous on O34 curves, but it did manage to stay on the track. It was much happier on the O42, which makes sense, because American Flyer O gauge track was 40 inches in diameter, just like its S gauge track.

Once we were confident it was running, we packed it back up. Todd was going to go surprise his dad with it. It’s been a long time since its last run. I hope he’ll enjoy seeing it roam the rails again.

Now that I’ve seen some of the late prewar 3/16 scale American Flyer up close and personal, I have a new admiration for it. I own a number of the Flyer freight cars from that period, but none of the locomotives. The detail is very good, and they run smooth and are geared low, so they have plenty of pulling power.

I’m sure Todd’s dad will be happy to see it running again. I know I sure enjoyed fine-tuning it.

Excuse me while I go check eBay…

Aliens on my train layout

Dave Farquhar Toy trains , , , , , , , , , , , , ,

I bought a couple of aliens for my train consist today. At the annual TCA Ozark Division train show at Lutheran South that happens every December, I spotted some lonely American Flyer bodies sitting neglected on a table. There were two steam locomotives, a gondola, a boxcar, and a caboose. I looked at the locomotives but there wasn’t any way I could remotor them with parts I had available. I did buy the boxcar, and then came back for the gondola.

I spent a total of $3 for these artifacts from 1958. Not bad.The problem for me is, they’re from 1958. American Flyer was doing S gauge in 1958. I’m into O gauge.

But that’s OK.  S gauge is 1:64 scale. O27 (which is the flavor of O I like, because it’s what I grew up with) is supposed to be 1:64 scale. Hold an American Flyer S gauge gondola up next to a Lionel or Marx O27 gondola, and they’re awfully close to the same size. Sure, there’s some difference, but when you look at real trains, not every boxcar is exactly the same height, and not every gondola is exactly the same height and length either.

K-Line took some criticism when it dusted off the old Marx O27 molds, outfitted them with S gauge trucks, and tried to market them to S gaugers because the Marx boxcars are taller than the American Flyers, and when you measure the Marx car with a scale ruler, it’s a funny length. But most people don’t notice. When I put a Marx O27 boxcar next to my Flyer 805 with O27 trucks on it, the difference wasn’t as pronounced. You can tell the Flyer is shorter, but something about the O gauge trucks makes the difference harder to notice.

It took me about 10 minutes to outfit the Flyer gondola with some spare Lionel trucks I had kicking around. Then I decided I wanted a conversion car, so I put a Marx truck on one end and a Lionel on the other. It looks good with my Marx and Lionel gondolas.

It took me considerably longer to get the boxcar in running order, since I had to fashion a frame for it. So I grabbed a bunch of junk from the scrap box and I fashioned a frame. That ended up taking me a couple of hours to do (I can do it a lot faster when I’m doing several at once and I have all my tools and materials in order). For what I make per hour, I could have bought several nice boxcars, I know. But this was more fun than what I get paid to do, and besides, nobody was offering to pay me to do anything today. And besides, rescuing a lonely boxcar off the scrap heap is a whole lot more meaningful than just plunking down some cash.

Once it was all together, I grabbed Dad’s old Lionel 2037 and put it on a loop of track on the floor with the Flyer 803 and 805 and a Marx boxcar that I rescued from a similar fate about a year ago. I had to work out a few kinks of course, but it wasn’t long before the consist was running smoothly.

I know a lot of people who run 1950s trains tend to do so homogeneously. It tends to be all Flyer or all Lionel or all Marx. But all of them have their strengths. For one, all of them did cars that the others didn’t. While American Flyer’s locomotives are amazingly smooth runners–even their cheapies–I don’t think American Flyer made anything that has all of the positive attributes of the Lionel 2037: It’s no slouch in the smooth running department itself, it’s a great puller, it’s reliable, and it’s common as dirt so you can easily find a good one for around $70. And as much as I like Marx, Marx never made anything quite like the 2037 either. The Marx 333 can’t pull with a 2037, it’s nowhere near as common, and these days it’s more expensive too.

But Marx and American Flyer made plenty of cars in plenty of roadnames and paint schemes Lionel never made. And when they did overlap, there tended to be some differences, just like you see in real life. So turning some dilapidated American Flyer cars into O27s was a nice way to add some unique rolling stock to my roster.

I’m happy. I’ll definitely keep an eye out for more American Flyer cars that need running gear.

I\’m published again

Dave Farquhar Toy trains , , , ,

It was a small-time gig, but if it helps pay the bills, that’s all that matters. I published a guide to refurbishing 1950s Lionel, Marx, and American Flyer trains over at Associated Content.I guess it’s ironic that I used a picture of an American Flyer train, seeing as I only owned a postwar Flyer S gauge train for about two weeks before I traded it for some Marx stuff. But it was the only picture I had handy.

Cheap buildings for a train layout

Dave Farquhar Toy trains , , , , , , , , , , , ,
Cheap buildings for a train layout

I’ve read about The New Pretty Village, published in book form by Dover Publications in 1980, as a source of buildings for a train layout, particularly a layout featuring tin litho Marx or prewar trains. Now I’ve got one in my hot little hands. I found some pictures of a reproduction online, and Marx expert Walt Hiteshew’s layout has used them as well.

Read more

Cheap train accessories from Big Lots

Dave Farquhar Toy trains , , , , , ,

Yesterday while the wife was scooping up cheap groceries at Big Lots (also known as Odd Lots in some parts of the country), I spied some useful stuff in the toy section.

They were cheap playsets, priced at 99 cents and $1.99, sold under the “Mini Wheels” and “Superior” brand names.The 99-cent sets generally consist of two or three plastic vehicles and a couple of figures; the $1.99 sets feature a vehicle, a couple of figures, a building, and a random assortment of plastic scenery items such as signs, gates, and the like.

I picked up a school set, a construction set, and an emergency set. The doctor and the paramedic will look good with the Plasticville Hospital, which was one of the last gifts I gave my Dad before he died. Construction workers are easy to place, and the kids from the school set will look good in conjunction with the K-Line figures from Marx molds that I already have. The school building looks pretty institutional and will probably just be a generic building flat in the back of the layout; I’ll see if I can pick up a used Plasticville or Marx/K-Line school building cheap at some point.

The school set sports a table with an umbrella; I have no idea how that fits into a school setting but it’ll look great sitting outside my O scale soda fountain building. I may have to pick up another school set mostly to get another table.

The actual scale of the items varies a little. These are cheap toys, not scale models. Adult figures scale out to about 6’7 or so in 1:64 (S scale) and a little over 5′ in 1:48 (O scale). The vehicles generally look like they scale out to about 1:72 but some of them, particularly the construction vehicles, would be fine in 1:64 and passable in 1:48. The buildings are about right for 1:64. They’d be fine on any traditional-sized American Flyer or Lionel or Marx layout and even rivet-counter modern hi-railers could find some usable parts inside.

The quality of the paint jobs on the figures themselves varies. I’ll probably end up doing some touch-up. I’m not sure yet what kind of paint will adhere well to the rubbery plastic they used, but I may be able to get by with just spraying some Testors Dullcote on them, touching up the offending areas, and then following up with more Dullcote. You don’t get a lot of quality for 99 cents, but for me, improving cheap toys to give them a home on a train layout is a big part of the fun.

If there’s one thing I’ve learned about Big Lots, it’s that not all stores carry the same things at the same time. I have three different stores within reasonable driving distance of me and there isn’t much consistency between them. These sets have also been spotted at other discount stores but I’ve only ever seen them at Big Lots.

Build a quiet and reliable toy train layout

Dave Farquhar Toy trains , , , , , , , ,

I hear two complaints about Lionel/American Flyer/Marx electric train layouts (besides the common complaints from uptight scale modelers, that is). One is the amount of space they take up, and the other is the noise.

Let’s tackle the noise. While we’re at it, we’ll tackle reliability.

Read more

A compelling toy train layout with animations done on the cheap

Dave Farquhar Toy trains , , , , , , , , , , , , ,

Layouts featuring Lionel, American Flyer, and other O or S gauge trains don’t have to be expensive. Joe Rampola has lots of ideas for creating a good-looking layout with lots of animation (aside from the trains) using mostly inexpensive items. His site has lots of pictures and video clips.

His work has been featured in both Classic Toy Trains and O Gauge Railroading magazines.Among his better ideas: Lay a loop of HO gauge track, then put 0-4-0 mechanisms from cheap HO scale locomotives in the frames of 1:43 scale die-cast cars and make streets for the layout. This is a similar approach to K-Line’s new Superstreets, but Rampola did it years earlier, and his approach is a lot less expensive for those who can live without instant gratification. His approach also allows you to use any vehicle you want, so long as you’re willing to modify it.

He also has plans and instructions posted for lots of inexpensive animations he did using the cheap unpainted (and unfortunately, discontinued) K-Line figures from the classic Marx molds of the 1950s. Sometimes you can still get lucky and find a box of unpainted K-Line figures hiding on hobby shop shelves.

He even has his animations controlled by an old Timex Sinclair 1000 computer. He gives enough detail that I suspect someone good with homebrew circuits could adapt his circuit and his program to another computer, such as an Apple or Commodore. Even a 3.5K unexpanded VIC-20 ought to be up to the task, let alone a behemoth Commodore 64.

I’ve always bristled at the thought of adding electronics to my traditional layout, because my trains are my escape from computers. But using a real computer–real men only need 8 bits–to control parts of a layout does have some appeal to me.