Marx 6-inch cars in beat-up condition are cheap and easy to find, but you can dramatically improve their appearance by repainting their frames. If the body is scratched up it still won’t be a showroom car, but you can halve the number of scratches on it and it will look nicer. Here’s how you go about restoring Marx 6-inch frames.
Change your printer’s IP address in Windows
Sometimes you may need to change your printer’s IP address, such as after you rearrange your network. It’s not hard to do, it’s just not always immediately obvious where the settings are.
This method works in Windows 7 and Windows 10. It probably also works in Vista and Windows 8, but I don’t have those versions anymore.
Remove and install Marx coupler springs
I did not invent this technique. Last week Al Osterud, a veteran Marx collector of many decades, shared a technique for removing and installing Marx coupler springs without the skills and steady hand of a microsurgeon.
All you need is a piece of 1/8-inch K&S square tube, which resembles the tool Marx used to install them at the factory, and a toothpick or a straightened paper clip. Marx wouldn’t make anything that wasn’t easy to put together, which made its couplers so maddening to work on. Why was it easy in the factory and nearly impossible at home? With the right tools, it is indeed easy.
Attach Marx lighted accessories and hide wiring in one step
A frequent question I read is how to attach tin accessories, such as Marx light posts and light towers, to a layout in a semi-permanent but reversible manner. I have found a way to do this, and as a bonus, it also makes it easy to hide the wires that are feeding the lights and makes the wiring simpler.
What to check when Lionel Magne-Traction doesn’t work
In the 1950s, Lionel started putting magnets in the axles of some of its trains to increase their pulling power and help the trains stay on the track as they highballed around tight O27 and O31 curves. They called this feature Magne-Traction.
In time Magne-Traction was replaced with rubber traction tires, but needless to say, if your locomotive has Magne-Traction, you probably want it to work. Here’s how to make sure it works.
Disassemble a Marx 408 street light
The Marx 408 street lights are difficult to disassemble. They aren’t difficult because they’re complicated, because they’re not. But it takes a bit of coordination and more than a lot of brawn to get them apart.
But if you need to rewire or repaint one, you don’t have a lot of choice, so here’s how it’s done.
Make display shelves out of rusty track
Some people try to fix rusty track, while others argue it isn’t worth the bother. But if you’re in the latter camp, you still have options besides trashing it: Make display shelves out of it.
My local train shop offers questionable track to his regular customers for free whenever he gets it, rather than trashing it or selling something that an unfamiliar customer might be unhappy with. I turned down a box of O31 track recently, then came to regret it a couple of weeks later when I remembered I could have used it. But that’s OK–he’ll probably have more next Saturday. Or the Saturday after that if not. I had plenty of disused track in a big tub under my layout anyway.
Selling Tyco trains
I got an inquiry last week about selling Tyco trains. As a child of the 70s and 80s, I certainly remember Tyco, and in recent years Tyco has gained a bit of a following.
If you’re looking to sell some Tyco gear, you certainly can do it, but you have to keep your expectations realistic. You’ll probably be able to sell it, but don’t expect to get rich off it.
Restoring lithographed train cars
If you have vintage tin lithographed train cars made by American Flyer, Bing, Dorfan, Ives, Lionel, Marx, or another make I’m forgetting and some of them are worse for wear, there are a few things you can do to improve their appearance.
Keep in mind these won’t make them new, and they won’t fool anyone. One reason collectors like lithography is because they can easily recognize a touchup. But you can make beat-up cars look better, and that’s what I’m going to talk about today.
Cleaning electrical contacts with Everclear
When I was 19 or 20, I paid a visit to my old grade school to do some computer repair. My fifth-grade teacher dropped in, saw me cleaning up the contacts on a circuit board, and asked why I wasn’t using Everclear. Cleaning electrical contacts with Everclear is, at least, a practice people talk about a lot.
Well, I couldn’t legally buy Everclear yet, for one thing. But let’s talk about why Everclear is good for cleaning electrical contacts but there are other things that can be better.