locking pliers

Restoring Tootsietoys and other early diecast vehicles

Dave Farquhar Toy trains , , , , , ,
Restoring Tootsietoys and other early diecast vehicles

Restoring Tootsietoys can be a fun and satisfying way to enjoy old toy vehicles. Whether you want your childhood toys to look nice again or just enjoy bringing new life to neglected examples, it can be as easy and as affordable as you want it to be.

I’ll talk specifically about Tootsietoys here, but the principles apply to other vintage diecast cars of the same era like Hubley or Midgetoy.

Read more

Lionel KW diode installation

Dave Farquhar Toy trains , , , ,
Lionel KW diode installation

Lionel transformers use a selenium rectifier disc to produce a jolt of DC voltage to activate their train whistle. These discs degrade over time, so a decades-old transformer often produces a pretty anemic whistle–even one of the bigger transformers like the 190-watt Lionel KW. Replace the disc with a diode for a cost effective and reliable fix for that wimpy whistle. Here’s a step by step guide to a Lionel KW diode upgrade.

Read more

Repair Lionel ZW binding posts cheaply

Dave Farquhar Toy trains , , ,
Repair Lionel ZW binding posts cheaply

If your Lionel ZW or VW transformer lights up and hums but doesn’t output any voltage on one or more of its pairs of binding posts, there’s a good chance one or more of the binding posts is bad. It’s possible to repair Lionel ZW binding posts cheaply.

By far the most failure prone part of the Lionel ZW and VW is the binding posts where the wires connect to your track. Fortunately, there’s a workaround that works sometimes. But if you want something better than a workaround, a proper repair is cheap and not difficult.

Read more

Fix a Marx 999 that derails a lot

Dave Farquhar Toy trains , , , ,
Fix a Marx 999 that derails a lot

Marx’s most popular locomotive might be the 999, because it can pull anything Marx made–6-inch tin, 7-inch tin, 3/16-scale tin, 4-wheel plastic, and 8-wheel plastic–without looking out of place. It really only has one problem: The front trucks on many 999s are prone to derailments.

Counterintuitively, the fix for a 999 is the opposite of how you fix the same problem on many other O gauge electric trains.

Read more

Fixing a bent Lionel 2034 die-cast roof

Dave Farquhar Toy trains ,

I had a Lionel 2034 engine that had, at some point in its life, suffered a fall off a table, most likely onto concrete. The result was a severely bent corner on the cab roof.

But a fall off the table doesn’t have to be the end of the line. It’s possible to fix this injury.

Read more

How to attach trucks to Lionel train cars with screws

Dave Farquhar Toy trains , , , , , , , , , , ,

Frequently the trucks (the wheel/coupler assembly that sits under train cars) come unattached. Lionel trains from the 1970s and first half of the 1980s are especially prone to this, though other makes of trains aren’t immune either. And sometimes you just want to change the trucks–some Lionel and Marx O27 cars are just the right size for American Flyer S scale, for example, only the trucks are the wrong gauge.

It’s tempting to try to just re-attach them with a nut and bolt, but as the train runs in circles around the track, the nut loosens and eventually works its way out.

The key is all in the type of nut you use.

Read more

How to straighten bent prewar/tinplate axles

Dave Farquhar Toy trains , , , , ,

A common problem with prewar/tinplate cars, regardless of make (American Flyer, Ives, Lionel, Marx) is bent axles. If the car wobbles when it moves, one or more of the axles is bent.

Reproduction parts might or might not be available, so I prefer to just straighten the old ones.

Read more

Fix or restore Lionel track

Dave Farquhar Toy trains , , , , , , , , , , , ,
Fix or restore Lionel track

It’s that time of year again. Time to get that old Lionel (or Marx or American Flyer) electric train running before the holidays sneak up. More often than not, the track isn’t in the best of shape. Fortunately, it’s not all that hard to fix or restore Lionel track.

Believe it or not, you can effectively remove rust from old Lionel track with a ball of aluminum foil. A small ball of aluminum foil plundered from your kitchen and five minutes of your time is likely to be enough to restore a loop of Lionel track from rusty, unusable junk to reliable operation.

Read more

Build a quiet and reliable toy train layout

Dave Farquhar Toy trains , , , , , , , ,

I hear two complaints about Lionel/American Flyer/Marx electric train layouts (besides the common complaints from uptight scale modelers, that is). One is the amount of space they take up, and the other is the noise.

Let’s tackle the noise. While we’re at it, we’ll tackle reliability.

Read more

How to get that dusty old train running again

Dave Farquhar Toy trains , , , , , , , , , , , , , , ,
How to get that dusty old train running again

It’s the weekend after Thanksgiving. The time of year when nostalgia runs high and ancient toy trains come out of the basement or the attic and get set up again until sometime after the new year.

Well, hopefully they make it that long. Here are some tips for getting old Lionel, American Flyer, Marx, and similar electric trains running again.

Read more