lionel Archives

Home » lionel » Page 10

Testing electric train track

Dave Farquhar Toy trains December 16, 2015December 13, 2021american flyer, lionel, Lionel O27, lockon, marx, o27, s gauge, troubleshooting

I have a method of testing electric train track from Lionel, American Flyer, Marx or any other brand. The key is to test it one piece at a time, so you know any problem you found is isolated to a single piece of track.

Here are a couple of different ways to test, depending on what tools you have available.

Dave Farquhar

David Farquhar is a computer security professional, entrepreneur, and author. He has written professionally about computers since 1991, so he was writing about retro computers when they were still new. He has been working in IT professionally since 1994 and has specialized in vulnerability management since 2013. He holds Security+ and CISSP certifications. Today he blogs five times a week, mostly about retro computers and retro gaming covering the time period from 1975 to 2000.

dfarq.homeip.net

How to disassemble a Marx 999 locomotive

Dave Farquhar Toy trains December 13, 2015November 19, 2018american flyer, boxcar, clearcoat, commodore, hardware store, lionel, Lucas Red, marx, marx trains, metal polish, o27, tin, trainz

Disassembling a Marx 999 locomotive isn’t too difficult, and it’s easier than the Marx 666, but it helps to have some instructions.

The nice thing about the 999 is that if you can disassemble it, there’s a long, long list of Marx locomotives that disassemble in pretty much the same way: the Commodore Vanderbilt, the Mercury, the tin Canadian Pacific 391, and the tin steamers 592, 593, 594, 833, 897, 898, and 994.

Marx designed its trains so that a father or older brother could service them, so it comes apart with simple household tools, and you can get most of what you’ll need to service it at the nearest hardware store, with the probable exception of the bulb for the headlight.

Dave Farquhar

dfarq.homeip.net

Specs for the Lionel 6-12053 accessory wire–and how to make your own

Dave Farquhar Toy trains December 12, 2015April 15, 2017lionel, train layout

A question the other day caught me off guard–how long is the Lionel 6-12053 accessory wire for Fastrack? I know a lot of random stuff off the top of my head, but I had to do some digging to find out it was 26 inches long–approximately.

Intended to clip onto leads on the underside of a Fastrack section, you can use it to power an accessory, as an additional power drop, or as an extension if the stock wires on your terminal section are too short.

If you need a different length, or need several and just don’t want to pay Lionel’s price, you can also make your own.

Dave Farquhar

dfarq.homeip.net

How to disassemble a Marx 666 locomotive

Dave Farquhar Toy trains December 11, 2015September 3, 2017hardware store, lionel, Louis Marx, Lucas Red, marx, marx trains, o27, tin, trainz

Disassembling a postwar Marx 666 locomotive, or its plastic counterpart the 1666, isn’t too difficult, but it helps to have some instructions.

Marx designed its trains so that a father or older brother could service them, so it comes apart with simple household tools, and you can get most of what you’ll need to service it at the nearest hardware or auto parts store, with the exception of the bulb for the headlight.

Dave Farquhar

dfarq.homeip.net

Cleaning Lionel Fastrack

Dave Farquhar Toy trains December 6, 2015October 26, 2021christmas, Cleaning Lionel, HO, ho scale, isopropyl alcohol, lionel, Lionel Fastrack, tin, tubular track

Lionel Fastrack has some advantages, but after a decade or so of using it under a Christmas tree, I have to say staying clean isn’t one of them. Here are the secrets of cleaning Lionel Fastrack safely.

Dave Farquhar

dfarq.homeip.net

How many Lionel CTC lockons you need

Dave Farquhar Toy trains December 5, 2015September 11, 2022american flyer, lionel, lockon, marx, marx trains, o27, s gauge, trainz

You usually need at least two Lionel CTC lockons, but most Lionel O and O27 train sets came with a single CTC lockon connector.

If your train slows down as it gets farther away from the transformer, that’s the biggest tell-tale sign that you need at least one more lockon.

Dave Farquhar

dfarq.homeip.net

How to tell if a Lionel tender has a whistle

Dave Farquhar Toy trains November 27, 2015September 15, 2016electric trains, lionel, train show, troubleshooting

One of the things Lionel did that set its electric trains apart from its competitors was integrating a whistle in the tender that was included with its steam locomotives. Because of the added play value and charm, the whistling tender is a sought-after feature, even in this era when electronic sounds are so inexpensive that even dollar store toys sometimes have them.

Here’s how to quickly tell if a Lionel tender has a whistle.

Dave Farquhar

dfarq.homeip.net

Lionel crossovers and Marx trains

Dave Farquhar Toy trains November 21, 2015September 15, 2016lionel, Lionel O27, lionel train, marx, marx trains, o27

A common question is whether Marx trains will work with Lionel crossovers, or vice versa. The answer is not well, but with a caveat. A big caveat. Here’s what to look out for with Lionel crossovers and Marx trains.

Dave Farquhar

dfarq.homeip.net

Available diameters of tubular O and O27 track

Dave Farquhar Toy trains November 19, 2015October 22, 20221980s, lionel, lionel train, marx, Marx O34, marx trains, o gauge, o27, RADIUS, sakai, tubular track

A frequent question, especially for those who are just discovering or rediscovering vintage Lionel and Marx trains is what sizes of track are (or were) available, and how many pieces come to a circle.

Unlike other scales, Lionel marketed its track by diameter, not radius. As you undoubtedly remember from geometry class, radius is the distance from the center of the circle to the edge, while diameter is the distance from edge to edge. So a circle of O27 track is approximately 27 inches wide. O27 track stands about 7/16 of an inch tall, while higher end O gauge (also sometimes called O31) track stands about a quarter inch taller, at about 11/16 of an inch tall.

Dave Farquhar

dfarq.homeip.net