Author: Dave Farquhar

Selling Marx trains

Dave Farquhar Toy trains , , , , , , , , , , , ,

Since my advice on selling other makes of trains was popular, I thought I would give similar advice on selling Marx trains. Marx never got the respect that its competitors got, but its trains have built up a following over the years, and in the last decade as I’ve watched prices on competing trains slide, Marx has held its value.

Don’t expect to get rich selling off your Marx trains, but if you keep your expectations realistic, you’ll find an eager buyer, or ideally, at least two interested buyers so you’ll realize a good price at auction.

Read more

Job hunting on your own vs. using a recruiter

Dave Farquhar Careers , , ,

A former coworker contacted me last week. He’d been employed in the same place for the last 16 or 17 years and he couldn’t remember how to look for a job. Who better to ask than a guy who’s changed jobs 9 times in the same timeframe? One obvious question to ask regards job hunting on your own vs. using a recruiter.

In fairness to myself, government contracting causes a lot of job-hopping. And in fairness to him, the game’s changed a lot since the last time he had to play. IT Recruiters existed back then, but back then when you wanted a new job, you found it yourself.

I still use both methods.

Read more

Restoring Marx 6-inch frames

Dave Farquhar Toy trains , ,

Marx 6-inch cars in beat-up condition are cheap and easy to find, but you can dramatically improve their appearance by repainting their frames. If the body is scratched up it still won’t be a showroom car, but you can halve the number of scratches on it and it will look nicer. Here’s how you go about restoring Marx 6-inch frames.

Read more

Change your printer’s IP address in Windows

Dave Farquhar Windows , , , ,

Sometimes you may need to change your printer’s IP address, such as after you rearrange your network. It’s not hard to do, it’s just not always immediately obvious where the settings are.

This method works in Windows 7 and Windows 10. It probably also works in Vista and Windows 8, but I don’t have those versions anymore.

Read more

Remove and install Marx coupler springs

Dave Farquhar Toy trains ,

I did not invent this technique. Last week Al Osterud, a veteran Marx collector of many decades, shared a technique for removing and installing Marx coupler springs without the skills and steady hand of a microsurgeon.

All you need is a piece of 1/8-inch K&S square tube, which resembles the tool Marx used to install them at the factory, and a toothpick or a straightened paper clip. Marx wouldn’t make anything that wasn’t easy to put together, which made its couplers so maddening to work on. Why was it easy in the factory and nearly impossible at home? With the right tools, it is indeed easy.

Read more

Attach Marx lighted accessories and hide wiring in one step

Dave Farquhar Toy trains , , , ,

A frequent question I read is how to attach tin accessories, such as Marx light posts and light towers, to a layout in a semi-permanent but reversible manner. I have found a way to do this, and as a bonus, it also makes it easy to hide the wires that are feeding the lights and makes the wiring simpler.

Read more

What to check when Lionel Magne-Traction doesn’t work

Dave Farquhar Toy trains , , ,

In the 1950s, Lionel started putting magnets in the axles of some of its trains to increase their pulling power and help the trains stay on the track as they highballed around tight O27 and O31 curves. They called this feature Magne-Traction.

In time Magne-Traction was replaced with rubber traction tires, but needless to say, if your locomotive has Magne-Traction, you probably want it to work. Here’s how to make sure it works.

Read more

Disassemble a Marx 408 street light

Dave Farquhar Toy trains
Disassemble a Marx 408 street light

The Marx 408 street lights are difficult to disassemble. They aren’t difficult because they’re complicated, because they’re not. But it takes a bit of coordination and more than a lot of brawn to get them apart.

But if you need to rewire or repaint one, you don’t have a lot of choice, so here’s how it’s done.

Read more

Make display shelves out of rusty track

Dave Farquhar Toy trains , , ,
Make display shelves out of rusty track

Some people try to fix rusty track, while others argue it isn’t worth the bother. But if you’re in the latter camp, you still have options besides trashing it: Make display shelves out of it.

My local train shop offers questionable track to his regular customers for free whenever he gets it, rather than trashing it or selling something that an unfamiliar customer might be unhappy with. I turned down a box of O31 track recently, then came to regret it a couple of weeks later when I remembered I could have used it. But that’s OK–he’ll probably have more next Saturday. Or the Saturday after that if not. I had plenty of disused track in a big tub under my layout anyway.

Read more

Selling Tyco trains

Dave Farquhar model railroading , , , , , , , , , , , , , ,
Selling Tyco trains

I got an inquiry last week about selling Tyco trains. As a child of the 70s and 80s, I certainly remember Tyco, and in recent years Tyco has gained a bit of a following.

If you’re looking to sell some Tyco gear, you certainly can do it, but you have to keep your expectations realistic. You’ll probably be able to sell it, but don’t expect to get rich off it.

Read more