The Silicon Underground

Home » Page 62

Gotek troubleshooting

Dave Farquhar Retro Computing January 11, 2023December 27, 2022

Gotek flashfloppy drive emulators are a popular upgrade for retro computer systems, allowing you to replace finicky and expensive floppy drives and media with flash media. The flashfloppy firmware makes the drives much more capable, allowing them to work in a wider variety of machines, and also making it easier to copy image files from a modern PC directly onto the USB stick. Usually the upgrade goes very smoothly. But sometimes the drive doesn’t work. So let’s talk Gotek troubleshooting.

The first rule of Gotek troubleshooting is cabling. When the drive doesn’t work as expected, there’s a good chance it’s a cabling issue.

Writeback vs writethrough cache

Dave Farquhar Hardware, Retro Computing January 10, 2023March 3, 2025

I was fixing a PC with a fairly late 486DX2-66 motherboard in it. In checking it out, I found an interesting setting in its BIOS: I can use its L2 cache as either writeback or writethrough. But what’s the difference? What are the pros and cons of writeback vs writethrough cache?

Writeback is faster but was harder to implement than writethrough, so not all systems support it. If it’s available and your software doesn’t malfunction, use write-back.

Remembering Computer Shopper

Dave Farquhar Hardware January 9, 2023January 8, 2023

Computer Shopper was a monthly computer magazine, but it was more than that in some regards. Like the name suggests, it changed the way a certain demographic but computer. As hard as may seem to believe today, the main reason people bought it was for the advertising. The articles were good, but nobody bought it for the articles.

Lionel 6457 caboose

Dave Farquhar Toy trains January 5, 2023October 9, 2022

The Lionel 6457 caboose is a common and nearly iconic postwar Lionel car. It, or one of its close relatives, is probably the caboose you remember if you are into postwar-era Lionel.

Allsop Metal Art stand #33306 review

Dave Farquhar Retro Computing January 4, 2023March 24, 2023

The Allsop metal art large display stand #33306 is a useful ergonomic accessory for modern computers, especially laptops. But it also makes an excellent monitor riser or platform for using and displaying vintage and retro computers. Here’s a review with some tips.

Identify a cable with a multimeter

Dave Farquhar Hardware, Retro Computing January 3, 2023December 17, 2022

I spotted a useful cable at a used computer store recently. I wasn’t 100% certain what it was, but I had the ability to rewire it into what I needed if it turned out I was wrong. Here’s how I went about identifying the cable with my multimeter.

When Lionel bulbs won’t light

Dave Farquhar Toy trains December 29, 2022October 8, 2022

They don’t make light bulbs like they used to. Well, at least they don’t make miniature light bulbs that work every time anymore, assuming they ever did. Here’s what to do when your brand new Lionel bulbs won’t light.

Convert CGA or EGA to VGA (or MCGA)

Dave Farquhar Retro Computing December 28, 2022December 17, 2022

CRT monitors are getting expensive. CGA and EGA monitors even more so. In theory, every 1980s computer that used those types of monitor had one at some point. But the survival rate of the monitors was much lower than the survival rate of the computers, so there aren’t enough of them to go around. That’s led to a need to convert CGA or EGA to VGA.

What size screws to use for a GPU fan

Dave Farquhar Hardware December 27, 2022December 10, 2022

Sometimes GPU fan screws go missing, and sometimes the only way to get a bargain on a used GPU is to buy one with a missing fan. There is a pretty good chance that you won’t have any suitable GPU fan screws in your parts stash. In my case, the smallest screws I had in my parts stash were M2 screws, commonly used on laptop hard drives and SSDs. But they were too big for the shroud on a GTX 1050 TI that needed a replacement fan.

What a craftsman kit is in model trains

Dave Farquhar model railroading December 22, 2022June 29, 2023

In model railroading, a craftsman kit is a model kit consisting of wood and sometimes paper, and detail parts cast from soft metal. There is usually a fair amount of measuring, cutting, and gluing involved to build the model, and it usually requires a fair bit of patience and skill. That’s where the name craftsman kit comes from. You could get kids to build structures and even model railroad rolling stock.

Craftsman kits lost some prominence due to the widespread use of plastics, but they are starting to see something of a resurgence in modern times. Here’s why.