Cheap cable management

Dave Farquhar Uncategorized

If the back of your desk is a rat’s nest, here’s a cheap way to manage those cables.

This method uses a $4 box of large binder clips, plus some screws and washers. You may find it’s cheaper to buy a box of screws and washers as well.

I worked in a shop once where they contracted out the cable management. Calling those guys perfectionists was the understatement of the century, but their cable runs looked like a work of art.

There seemed to be two keys. One is getting your cables a uniform length. You can’t necessarily control that completely, but you can bundle up the slack space somewhere that it won’t be visible. The other key is bundling the cables tightly at regular intervals. Velcro strips are invaluable for that, though you can use cheap and cheerful wire ties if you don’t move cables around very often.

The 4W Lights of America Power LED from Costco: Finally a good LED lamp for bathrooms

Dave Farquhar Saving money ,

Costco sells a 4W LED lamp by Lights of America. They briefly sold LEDs a few years ago from that company that weren’t highly regarded, and I think a lot of people are scared of the brand because of that experience. Not to worry, though. These are much better.

They’re billed as 25W replacements, and they’re globe-shaped. I find they’re a good replacement for 25W globes in bathroom fixtures.

Read more

Speed up Android with Seeder Entropy Generator

Dave Farquhar Android, Software , , ,

Seeder Entropy Generator, released on XDA Developers, became a sensation the last couple of days. There’s debate whether it works, and debate over why it works, but enough people reported an improvement that I gave it a whirl. The difference was noticeable. There is a downside–more on that in a bit.

I don’t know why it works either, but it made my pokey 800 MHz Nook Color running Cyanogenmod 7.2 more responsive. What I haven’t seen is a nice how-to on installing it. Read more

That other use of Stability Test that I promised

Dave Farquhar Android, Hardware ,

I promised earlier this week to write about another use of Stability Test. The other use of Stability Test is for underclocking your CPU for better performance, undervolting it for better battery life, or both.

While a good number of people do both to their Nook Color, I can’t get mine to run for any length of time without crashing when I do either. Oddly enough, my Nook Color will pass Stability Test for 12 hours at 1.1 GHz, but then when I go to use it, it freezes up.

Mine was a refurb unit, so I may not have gotten the best chip in the batch. It’s entirely possible that it’s a refurb because some other enthusiast got it, tried to overclock it and couldn’t, then exchanged it for another, and then B&N tested and resold it as a refurb. But I find using Go Launcher EX makes life at 800 MHz tolerable on the machine anyway, especially when I use the apps for the web sites I visit most frequently, rather than trying to use a web browser.

A cheap Nook Color case from an unexpected place

Dave Farquhar Hardware ,

I take my Nook Color with me enough that I wanted a case for it, but nothing too fancy, seeing as I’d rather spend money on hardware than on accessories.

Most retail stores carry cases for 7-inch tablets and e-readers, but they’re a high-margin item, often selling for $20 and up, which is 25% of what I paid for the device. I looked on Amazon, of course, where I found multiple cases for less than $10, but found conflicting reports as to whether any given case actually fit the Nook Color. Read more

The best glue for paper models

Dave Farquhar Model Building , , ,

If you’re looking for the best glue for paper models, you’ve come to the right place. To build a paper model that lasts, use a pH-neutral PVA bookbinder’s glue. My wife, who has a master’s degree in art education, specifically recommended Books by Hand PVA Adhesive. Although it looks and smells and feels like regular white glue, I find it does a better job of not warping the paper and not bubbling. And for longevity’s sake, you want something that doesn’t change the pH balance of your paper. Books by Hand glue is pH neutral.

I started building model structures with Books by Hand glue in 2004. Those miniature buildings still look like I built them yesterday. Read more

R.I.P.: Netbooks

Dave Farquhar Hardware , , , , , , ,
R.I.P.: Netbooks

The last two netbook vendors standing, Acer and Asus, have both announced they’ve produced their last netbook. So they’re joining the Playstation 2 in the land of the digital dinosaurs, though I suspect more people will miss the 12-year-old game console than the netbook. The Guardian has an analysis, but basically they blame the emergence of tablets, and the increased cost of producing netbooks with Windows.

Read more

Go Launcher Ex is a nice upgrade for Android

Dave Farquhar Android, Software , ,

I gave Go Launcher Ex a whirl on my hacked Nook Color-turned-tablet. The promise was that it’s faster and smoother than ADW Launcher, the default program launcher that comes with Cyanogenmod. Unlike some promises, it was true. It’s fast, smooth, polished, and customizable.

I was a little apprehensive at first–how does one go about changing something so fundamental as the program launcher–but it was easy.

Read more