Atari 2600 won’t turn on? Try this.

Atari 2600 won’t turn on? Try this.

I was going through my spare parts bins when I found a couple of Atari 2600 consoles I’d forgotten about. It turned out they didn’t work, which is probably why they ended up in those bins. But if your Atari 2600 won’t turn on like mine, you can fix it.

Usually when an Atari 2600 won’t power on, it’s one of four things: a bad AC adapter, a dirty power switch, a loose power jack, or a bad voltage regulator. Two of those problems are super easy to fix, while the other two may require soldering. If you can’t solder, or don’t have the equipment, I still have a suggestion for those fixes too.

Read more

Is Atari still in business?

Is Atari still in business?

Is Atari still in business? That’s complicated. It might be better to ask is Atari still a company. A lot of things happened to the Atari name through the years and that can make it hard to keep track. It also gives retro gaming people something to argue about.

So let’s look at what happened to Atari. Atari is still a company, and that company actively uses the brand and Atari logo. But the ownership changed hands a lot in the last four decades, and sometimes multiple companies used the Atari brand at the same time.

Read more

Was Atari 2600 8-bit? Kind of

Was Atari 2600 8-bit? Kind of

I think most people know the Nintendo NES was an 8-bit system. That tends to confuse people when it comes to the previous-generation system, the Atari 2600. Was Atari 2600 8 bit? Or something else?

The answer, of course, is that it depends.

Read more

Connect Atari to modern TV sets

Connect Atari to modern TV sets

Television standards have changed in a few ways since 1977, when Atari released the Atari 2600. Even if you have a CRT from the 1990s, it might not have an obvious place to hook it up. But it’s possible to connect the Atari Video Computer System to modern TV sets. Here’s how.

It’s possible to connect an Atari 2600 to a modern-ish TV using an RCA to F connector to plug straight into the antenna jack, assuming the TV is old enough to have an antenna input. Getting composite or HDMI is trickier but still doable, requiring additional equipment or modification.

Read more

Can SNES play NES games? Sort of.

Can SNES play NES games? Sort of.

Can SNES play NES games? That question is older than the SNES itself. But the two systems aren’t backward compatible, unfortunately. At least, not when the two systems were still on store shelves together. That’s changed in modern times to a degree at least. More on that in a minute.

There are physical limitations that prevent an NES cartridge from even fitting in an SNES. But there was a technical reason to make the two physically incompatible. Even if the cartridge would fit, it wouldn’t work.

Read more

Original Atari 2600 heavy sixer

Original Atari 2600 heavy sixer

The Atari heavy sixer, also sometimes called the Atari 2600 heavy sixer, is the earliest version of the popular 1970s and 1980s game console. While not super rare or valuable, it is more valuable than most of the later versions of the Atari Video Computer System. You can think of it as the original original Atari 2600.

The earliest Atari 2600, released September 11, 1977 and nicknamed the heavy sixer, has six switches on the top, distinct from later units that had four. It weighs 1.2 pounds more than later six-switch models.

Read more

Cleaning NES games and consoles

Cleaning NES games and consoles

Anyone old enough to have played with an original Nintendo NES knows the problem: You plug in the cartridge, turn on the system, and get a blank screen and the power light blinks at you. The schoolyard fix is to take out the cartridge, blow into it, then put it back into the system. Then, with a little luck, you can play your game. The trouble is, that’s just a short-term fix. In the long run, it makes the problem worse and eventually the system can’t play games at all. The solution is to clean them. Here’s a process for cleaning NES games.

Read more

How to connect a NES to a modern TV

How to connect a NES to a modern TV

TVs have changed a bit since 1986, and memories have faded a bit too. So just in case you’ve lost some cables, or just need a refresher, here’s how to connect a NES to a modern TV so you can get a Zelda or Mario fix. You have a couple of options for this, including AV cables.

Keep in mind your vintage 8-bit Nintendo NES will work fine with a modern LCD or LED TV, but the light gun won’t work with newer TVs. The light gun requires a CRT to operate. Also, while it is possible to modify an NES to output something resembling a modern digital video format, I assume you just want to connect an unmodified Nintendo console to an unmodified TV.

The NES’s design lends itself better to modern TVs than some other retro gaming consoles, such as the Atari 2600. This is good, since Nintendo systems aren’t backward compatible.

Read more

Sears Atari 2600 clone: The Sears Video Arcade

Sears Atari 2600 clone: The Sears Video Arcade

For years, Sears sold an Atari 2600 clone called the Sears Video Arcade. But the Sears Atari 2600 clone wasn’t exactly a clone in the sense we think of it. Atari made Sears’ video game system for Sears and let Sears put its name on it. Here’s why. Read more

Atari 5200 power supply specs

The ill-fated Atari 5200 doesn’t use the same power supply as the more popular Atari 2600. If you need a replacement power supply, here are Atari 5200 power supply specs that will work.

There are any number of common power supplies from other consoles that will fit, but most of them will damage the console, so you have to be careful.

Read more