02/03/2001

I’m starting to think I’ve got a defective board. I cracked out one of the Soyo SY-7SBB motherboards yesterday (the $29 wonder) and couldn’t get it to work, regardless of what mount holes I grounded. I’ve never seen a board this sensitive to grounding before, so I’m really starting to wonder about it. (Most modern boards don’t mind being grounded in all possible spots; most ATX cases do just that and that’s what most people use. And I can’t think of a time when I built a system and it objected to being grounded in only one place either. Most boards just aren’t all that picky.)

So, since I’ve had an otherwise identical board running, I’m inclined to suspect the board itself.

I’ve had the other one running briefly, outside of a case, so I’ll try the second one and I’ll probably have to exchange the first.

It just dawned on me that how I came to this conclusion is probably useful information. First, I tried a different power supply, and got the same result. I connected the PC speaker and tried powering up with no memory present. With a system with an Award BIOS (or just about any other system), that should have resulted in beep codes. Motherboards don’t like to boot without a video card or RAM, so you can do a quick-and-dirty test for life by trying to make it boot without one or the other of those.

No response. So I cleared CMOS (check the manual; the way you do this varies). Still no response. I tried yet another power supply. Nothing. I knew the CPU was good because I pulled it from a working system. Same for the memory, though if the memory were bad I should get a beep code. I put the board in three different cases. Nothing.

And yes, I did check for shorts each time I put the board in a case. Loose bits hanging around inside the case are very detrimental to a board’s health.

It’s kind of a drag; I’d have liked to have one of the systems up and going by now. But this isn’t mission-critical; for mission critical stuff I buy Asus boards and now I remember why. I had good luck with Soyo a few years back, but I haven’t found anyone who matches Asus’ track record overall.

Reviews. I found several reviews yesterday, none of which were remarkably good or remarkably bad. I’ll put together a roundup for tomorrow I think.

Apologies to all of those who’ve sent e-mail. Hopefully I’ll catch up this weekend. Between cleaning my place up, working slightly longer-than-usual hours, a couple of meetings in the evenings, and writing another article for Shopper UK I haven’t been responding to mail very promptly this week.

One last thing: the story of a true hero. One of my heroes got a writeup in the Kansas City Star this morning. His name is Jim Eisenreich. Eisenreich was a promising young outfielder who battled (and beat) Tourette’s Syndrome. He made his comeback in Kansas City, then went on to win a World Series in Philadelphia. I don’t know how long the story will be online at the Star, but it’s worth a read even if you’re not a baseball fan. He’s another never-give-up story, but you can’t have too many of those.

02/02/2001

Linksys revisited. Thanks for the corrections on the Linksys router. Yes indeed, with recent firmware you can change the MAC address. It’s buried, but that’s good–you shouldn’t routinely do that anyway.

Reviews of reviews again. Time to get back in the saddle. Yee-hah.

Pentium 4 systems (THG)

In this roundup, Tom Pabst complained bitterly about PC makers’ exploiting public ignorance, selling high-clock speed systems with shoddy peripherals in order to drive down the cost. So he built systems roughly equivalent to four PCs–a low-end P4 and similarly priced Athlon, and a high-end P4 and the top-of-the-line Athlon. Then he pitted them against each other. The P4s came up sorely lacking.

Performance of the real McCoy could vary significantly (no one thinks about the power supply in performance equations, but it plays a role), so this test is anything but conclusive, but it does finally and authoritatively point out the differences good components make. People who’ve read Computer Shopper (US) religiously and seen system shootouts know this–Shopper always printed system configurations, and occasionally an overachiever would show up, with great components, and blow away supposedly higher-end systems. This article on THG examines this phenomenon and does it well, I think.

Pabst does seem to forget that businesses aren’t in business to care about consumers though–they’re in business to make money. I’d like to think the marketplace rewards straight-shooters, but considering my book sales, I know that’s not always the case. As long as Dell thinks it’s good for profits to stay in bed with Intel, Dell will be in bed with Intel, no matter what it does to consumers.

MSI MS-6339 P4 motherboard (Sharky Extreme)

This is a good look at a fairly competitive P4 board, which explains the ins and outs of this board and why Intel changed the ATX standard. It points out this board’s quirks, and benchmarks it against an Intel and an Asus board. It does a good job of pointing out the reasons why you probably don’t want to buy a P4 at this time. I found it interesting that this benchmark didn’t mention Quake 3, which is one of the few things the P4 is really good at. Refreshing (I couldn’t care less about Quake scores, and I know I’m not alone on that) but ironic.

Congratulations to a fellow Missourian. I don’t like to talk politics much here, but… My fellow Missourian John Ashcroft is the new attorney general. Appropriately, the supposed racist was sworn in by Clarence Thomas.

As for the “Missouri fired him” rhetoric, here’s the truth on that: John Ashcroft and Mel Carnahan were the two most popular governors of recent memory. Were it not for term limits, Ashcroft would probably still be governor. Ashcroft and Carnahan were locked in a too-close-to-call race up until the point when Carnahan died in a plane crash. Carnahan then attained sainthood and won the election on a sympathy vote. Possible voter fraud in the city of St. Louis didn’t help matters any. But Ashcroft is a class act, so he didn’t contest the election, either on grounds of fraud or on grounds that a senator must be a citizen, and a dead man can’t be a citizen. Carnahan’s widow was then appointed to the Senate.

Teddy Kennedy threatened to filibuster Ashcroft, because he didn’t like Ashcroft’s conservatism. Never mind Ashcroft knows what the law is, and one of the tenets of his so-objectionable religion is that you obey and you uphold your government’s laws–no government exists without God’s allowing it to exist, according to John Ashcroft’s religion and mine. John Ashcroft is responsible to God to do his job, and to do it properly. His job is not to do Congress’ job. John Ashcroft knows this.

John Ashcroft, unlike most of his predecessors, has actually been an attorney general before. It was the post he held in Missouri before he was elected governor. John Ashcroft will do no less to uphold the law than his predecessor Janet Reno. If ever there was an honest and decent man, it’s John Ashcroft.

Jean Carnahan voted against Ashcroft. She said it was a matter of conscience. Really, what she was saying was John Ashcroft is too different politically from her dead husband.

John Ashcroft’s very different from her dead husband in another way too.

John Ashcroft suspended campaigning when his opponent, Mel Carnahan, was killed. It was a matter of conscience. It cost him the election. At the time he suspended campaigning, he said he didn’t care, whatever the cost–it was the right thing to do. That’s the kind of man John Ashcroft is. He does the right thing, whatever the cost.

John Ashcroft was good for Missouri. Now he’ll be good for the United States.

02/01/2001

I don’t like to do “this is what I did yesterday” messages but that’s all I’ve got. Mostly I re-imaged some Macs. I did get to put an HP optical drive in a Compaq Proliant server we bought used for pennies on the dollar from a failed dot-com. But no one had any drive rails. Luckily, I had a Compaq 386 sitting under my desk. I opened it up, pulled the 5.25″ drive, walked over to the Proliant, and it slid right in. Perfect. I unbolted the drive, bolted the rails to the optical drive (I had to find different screws), and put the drive right in. And the guy who normally handles the servers asked how I did it so fast. Hey, I did tech review on a book about PC hardware. I know how to work on these things… And I worked on far too many Compaqs my first two years of college. (And far too many IBMs my last two years of college.)

Hot tip: Compaq drive rails cost something like $30 from Compaq. Compaq 386s are free, when you can find them. Or they’re cheap. Or someone pays you 15 bucks to haul them away. Or, there’s eBay. I just found 12 people selling them there, with zero bids on them. Asking price: $4.99-$9.99.

I also parted out a Pentium-75 that no longer works. This is the only dead Micron PC I’ve seen, honestly. And I suspect the problem is the third-party memory in it (the memory there isn’t Micron, which tells me the original stuff was pilfered at some point). Since it’s useless, it’s either part it out and discard the stuff that can’t be used, or pay someone to haul it off. Well, I’m having a hard time getting my Soyo SY-7SBB motherboards running. Outside the case, they’re fine. Put them in one of my AT cases, and they don’t work. I suspect not enough grounding, or grounding in places it doesn’t want it. This Micron case is much more configurable than any of the AT cases I have, so it’ll help me solve the mystery. (I won’t go modifying my IBM PC/AT case until I figure out, with the Micron case’s help, where I need ground points. Then I’ll Dremel out the existing caseworks and put in spacers where I need them to be. Ah, the troubles I’ll go to for a chance to see someone’s face when they see something unexpected…

Last night after church, one of our seminary students was cleaning off his car. (We got some ice last night.) He had this dinky little plastic ice scraper that would probably fit in your shirt pocket. I was waiting for my car to warm up, noticed him struggling with that thing, so I pulled out my heavy-duty scraper, with its long metal handle and big brush, and walked over to his car. “I can tell you’re from Texas,” I said. Boom, boom, boom, and in 30 seconds I had all the remaining ice off his windshield. He watched me with huge eyes. I just laughed as I brushed off his windshield.

Heavy-duty ice scrapers are your friend. One day last week I had a half-inch layer of solid ice on my car. With this scraper, it still took me 10 minutes to clean it off. With a hand-size scraper, my only choice would have been to let the car run for 30 minutes with the defroster going full force.

And what’s this? I had 317 page reads at 3 p.m. yesterday. On a so-so DAY I get 317 reads. (I can get 600 on a good day; about 260 on a bad day.) That can’t be one person, because one person reading, if they spend two minutes per post, will get 30 in an hour. Maybe it was someone looking for something. I hope they found it. Or maybe a speed reader really really really likes my stuff.

And this from Gatermann. I got mail from a reader asking about getting a modem running under Linux. I noticed he used Southwestern Bell and suggested that was probably the problem, not his modem or Linux. I suggested he contact tech support and ask if Linux works. Gatermann piped in. They won’t even know what Linux is, he said. Remember, these are the people who couldn’t understand why they couldn’t ping me when I couldn’t get an IP address. (Yeah, I rolled my eyes too the first time Tom told me that story.)

But I suspect everyone there has heard of Linux. Heck, my ex-girlfriends know about Linux. The one I talked about taking me to the state capital and eating doughnuts on the steps (hey, if there are any Mizzou alumni out there and you know anything about this tradition, would you please e-mail me about it? Thanks in advance), one night we were sitting out there, and she brought up Linux. SHE did. At the time, I hated Linux because all I’d seen was Slackware. Another girl I dated briefly brought up Linux as much as she could because she knew I was writing a book about Linux at the time. Heck, people walk up to me at church and ask me if I know anything about Linux!

So Southwestern Bell employees have probably heard of Linux. But Tom’s right, they probably can’t say anything meaningful about it.

01/31/2001

Mailbag:

Music, HD, Linux modem

Sick. Something you’ll (hopefully) never see: DefragCam. I can blame one of my twisted coworkers for that idea.

A sad referrer showed up in my logs yesterday. It was a search request, from Hotbot, on the string, “I’ve never had a girlfriend.” I’m pretty sure that phrase appears as part of a sentence in Are we talking about more than just sunsets? but as part of a phrase. I seem to remember writing, “I’ve never had a girlfriend outside the winter months,” or something like that. I have no way of knowing where that request came from. Probably a bored, lonely teenager. More people have never had a girlfriend than anyone’s willing to admit. Including a majority of teenagers.

It’s only a problem if you let it be one. Unfortunately a lot of people do, and that makes them vulnerable to all sorts of scum, like advertisers and fringe religious fanatics and seedy individuals, all promising things they can’t or won’t deliver.

Not that I’m much of an advice-giver (unless you’ve got a slow computer, then I’m pretty good), but the best suggestion I’ve got is to find something you’re good at. Lose yourself in that. If you’re not good at anything, find something you enjoy and lose yourself in it. You’ll get good at it. That alleviates the boredom, and it builds confidence, which makes you good at other things. Does it make girls notice you? Only indirectly. But it’s better to be a winner who only occasionally has girlfriends (and remember, ideally you should only be in a successful relationship once anyway) than to be a loser who always has a girl.

I hate to sound callous, but given the choice between having a book published to my name, or having any of my ex-girlfriends back, I’d choose the book. I wouldn’t even hesitate. When I find a girl who’s cooler than writing magazine articles, and she thinks I’m pretty cool too, then I’ll know it’s time to settle down.

I guess that’s the other good thing about losing yourself in other interests. If a girl starts hanging around who’s more interesting than those things, great. If she’s not, that’s your subconscious mind’s way of telling you to keep looking.

A new way to benchmark. Finally, there’s a multitasking-oriented benchmark, available from www.csaresearch.com . Keep an eye on these guys. I didn’t use any benchmarks in Optimizing Windows, because they don’t reflect real-world performance and they generally test your hardware, not the operating system as it stands on your machine. This benchmark uses new methods that try to take multitasking into account, so it will do a better job of reflecting how a system feels. It was like I was telling my sister yesterday. If I put two computers in front of her, she doesn’t care which one puts up better numbers. She knows which one’s faster. But with a lot of the benchmarks today, the faster machine doesn’t put up the best numbers. Or a PC might put up numbers that appear to kill another, but when you sit down to use the two, you can’t tell a difference.

Time for a review. I’ve been so critical of reviews lately I decided to try my hand at writing one myself, to see if I’ve still got what it takes.

Linksys Etherfast Cable/DSL Router

Broadband Internet connections are increasingly common, and it’s hard for a single PC to use up all the available bandwidth. Plus, more and more homes have multiple PCs, and it’s a shame to spend $50 a month for Internet access and limit its use to a single PC. A number of third-party programs for sharing an Internet connection exist, and recenolution. These devices are about the size of a hub, plug into your cable/DSL modem, have a built-in firewall, and include one or more ports. You can plug your PCs into these ports and/or plug in a hub or switch so you can support a larger number of PCs. Another advantage of a standalone router is additional security against hackers. A Unix box can be very secure, but if a hacker does get into it, he can do a lot of unpleasant things, to you or to someone else (but make it look like you’re the one doing it). A hacker can’t do much to a router besides mess up its configuration. You can reset it and reconfigure it in five minutes. So the security of one of these devices is very tough to beat.

One of the most popular standalone cable/DSL routers is the Linksys BEFSR41, also known simply as the EtherFast Cable/DSL Router. It’s widely available for around $150. The best price I could find on it was $131. I tested the 4-port version. A 1-port and 8-port version is also available. The 1-port version is less expensive but requires a separate hub or switch. If you already have one of those, you can save some money, but the 4- or 8-port version is ideal since it includes a built-in switch. I have an 8-port dual 10/100 hub; the Linksys router therefore gives me three additional higher-speed network ports, since switches are faster than hubs. Most people will probably want the 4- or 8-port version, because it’s easy to get spoiled really quickly by a 100-megabit switched Ethernet LAN.

Configuration is wickedly easy. Plug it into your cable/DSL modem, plug a computer into it, turn all of it on, configure the PC for DHCP if it isn’t already, then open a Web browser and go to http://192.168.1.1 . Feed it the factory password (which is undoubtedly documented all over the Web, but I won’t document it here as well), then make the changes you need. Most people won’t have to do any configuration other than changing the configuration password. If you want to put it on a different subnet, do it, then run winipcfg, push the release all button, then the renew all button, reconnect to the router, and make other changes if need be.

Administration is easy too. Just connect to the router via its Web interface, and click on the Status tab. You instantly get your network status. If your ISP drops your connection, hit the Release, then the Renew button. From the DHCP tab, you can tell the router how many clients to support. You can go to the advanced tab to configure port forwarding or a DMZ if you want such a thing–most of us won’t.

The only thing I had difficulty doing was upgrading the firmware from the browser interface. The router must not have liked the version of IE I was using. However, nothing stops you from downloading and running the firmware upgrade directly–as long as you’ve got a Windows box handy. Mac and Linux users may have problems there. Firmware updates seem to come every couple of months.

The firewall built into the router is unable to pass Steve Gibson’s LeakTest, but all hardware routers have this weakness–it’s virtually impossible for a hardware router to tell the difference between innocent traffic and malicious traffic caused by a Trojan Horse. However, the router passes ShieldsUp! ( www.grc.com ) with flying colors.

The speed of the connection is certainly acceptable; with me running a caching nameserver on the Linux box it replaced that machine should be able to outperform any standalone router any time. Of course this is purely subjective; the speed of the Internet changes constantly. Nothing stops me from running a caching nameserver behind this router, which will help performance significantly. Local network performance on the built-in 10/100 switch is outstanding.

Appearance-wise, it’s a solid product, made of two-tone blue and black plastic but it’s not cheap plastic. Styling is modern but tasteful–no wild colors or translucent parts. It has indicator lights up front, a reset switch up front, and ports in the back. It also has built-in legs, so presumably it’s stackable with other Linksys hardware (I don’t have any Linksys switches or hubs, so I can’t check that).

The only flaw I can really find with this router is that the MAC address can’t be changed. Some ISPs authenticate against the card’s MAC address, which allows them to control how you connect to them. It also prevents you from using this type of device. Some competing routers allow you to change their MAC address, so they can spoof that card and get around the limitation.

I read of problems using it with services that use PPPoE (PPP over Ethernet). My service doesn’t, so I can’t test this. Buyer beware.

I was disappointed that the 45-page manual didn’t have an index, but it had a lot of nice information in it, such as pinouts for Ethernet cables. It’s written in clear, plain and straightforward English. Manuals of this length and quality are rare these days.

I think it’s a decent product, but for my purposes I want something else. I don’t want something so easy to reset to factory defaults and configure. Why? It’s getting corporate use, and I want it to be complex enough to scare people away. I want the user interface of an HP LaserJet printer control panel. It’s a pain to configure, so therefore end-users don’t mess with it. I’m not sure if I’ll find such a beast, but you bet I’ll look for it.

Mailbag:

Music, HD, Linux modem

How to slow down Windows

I sure didn’t see much that I liked yesterday. What kind of stuff did I used to write here? Oh yeah. Stuff like this.

How to slow down Windows. Yes, sometimes you want to do this, like when an old game runs too fast. You can do this with a simple free utility called Turbo . You tell it you want to run your computer at, say, 50% speed, so it works by creating a single high-priority process that uses half your CPU time. Tell it you want quarter-speed, and it chews up 75 percent of your CPU time. It works a little better on NT than on 9x, because NT’s timing is more precise, but it definitely slows the system down.

There are programs that just slow down one particular process, but most of those are shareware programs costing $25 or more. Turbo slows down the entire system, but its brute-force approach mostly works and you can’t beat the price.

An invaluable network utility for laptops. If you have a laptop and you connect to multiple networks (say a LAN at home and at the office, or if you’re like me and have more than one office), you need Netswitcher ( www.netswitcher.com ). It’s an $8 shareware utility. Definitely worth the money. And the author stands behind it. I had a problem getting the program to run under one particular circumstance, so I e-mailed tech support. The author responded and asked if he could call me. So we talked on the phone for a few minutes while we determined the problem, then he compiled a special build to work around our problem. Amazing, especially in this day and age when most companies won’t even pick up the phone. You might not get quite that level of support, but you probably won’t need it either because the program’s solid.

Check this one out. You’ll be glad you did.

And that’s more than I can say for most of what I read yesterday. Let’s get to that.

SCSI vs. IDE (THG) http://www.tomshardware.com/storage/01q1/010129/index.html

I had high hopes for this one, as SCSI-vs.-IDE is an even more incendiary issue than Windows-vs.-Linux or Macintosh-vs.-the-world, and unlike those, this debate should be fairly easy to settle. Unfortunately the review relied solely on benchmarks, and from raw benchmarks, you’ll come to the conclusion that there’s never any reason to buy SCSI drives when in reality the older IBM SCSI drive in the roundup will outperform the IDE drive for many everyday tasks even though it benchmarks poorly.

I’ve never met anyone who used a modern SCSI drive in a multitasking environment and then went back to IDE. Never ever. There’s more to this issue than sheer benchmarks.

Upgrading a Mac CPU (Byte) http://www.byte.com/feature/BYT20010124S0001

How the mighty have fallen. This piece would have never seen the light of day in the old print magazine.

First of all, Newer Technology has been in serious trouble for months. Newer dissolved before Christmas, and all of its engineering staff was hired by competitor Sonnet earlier this month. This is evidently news to the author, who says Newer “seems to have” ceased operations in December but their online store is still operational. No it isn’t. And Newer’s demise caused a huge splash in the Mac community when it happened.

Second of all, replacing a Mac CPU doesn’t always make sense. Upgrading a G3 probably does, but you’ve still got an old memory bus, old memory, and an old hard drive tied to a new CPU. You pay a fraction of the cost of a new computer, but you get a fraction of the performance too.

Plus, upgrading CPUs in some Macs is an absolute nightmare. I spent one of the worst weeks of my life trying to get a Sonnet G3 upgrade working in a Power Mac 7500. The only thing consistent about it was its lack of stability. Sometimes it booted and ran at the old speed. Sometimes it ran at G3 speed. Sometimes it was somewhere in between (presumably the L2 cache wasn’t getting enabled). It never ran very long. Sonnet technical support verified with me after checking a few things that the upgrade would never work right in that particular model. The local Mac dealer gave us a refund and vowed after our experience that he would never sell another CPU upgrade again. The author mentions it’s hard to buy these things at locally owned dealers, but never says why.

Some wisdom in choosing your upgrade would have been nice. You’d better at least double your CPU power, or you won’t notice much difference. Some wisdom about what to upgrade would be nice too. How many people just blindly throw money at CPU upgrades when they’d be better served by a faster disk or more memory?

At least the advice on working inside the Mac once he popped the hood was solid.

Abit KT7 review (Ars Technica) http://arstechnica.com/reviews/01q1/abitkt7r/abitkt7r-1.html

This review seems a bit late, as the KT7 has been on the market a long time and the hot chipset of today is the KT133A, not the KT133 featured on the Abit KT7. The reviewer caught a number of caveats with the board, which someone building a system around this board will be very happy to know. Benchmarking is incomplete, due to their inability to run Content Creation on it. So benchmarks are limited to Sandra and Quake 3, which are of limited use.

Benchmarking against the Asus CUSL2 board isn’t very useful; it would be nice to see scores against a one or two competing Socket A boards for comparison.

But the graphs start properly at 0 and the reviewer discloses his testbed, which is good. You can’t take those things for granted. He also discussed stability, which is a rare thing.

Really, this review wasn’t enraging, unlike most of the stuff I read yesterday (some of which was so bad it’s not worth even talking about). It just left me wondering what the point was, since the product’s remaining shelf life can probably be measured in weeks.

01/29/2001

Slim pickings. There isn’t a whole lot of new content going up over the weekend, so I’ll hit two useful, if slightly flawed hardware articles. And I guess I’ve gotta come up with some of my own stuff.

Shopping. I went computer shopping Saturday for the first time in, oh, years probably. I build my own and have been doing so since 1996, so I normally take no interest in retail PCs. But a friend of a friend is in the market for a PC, and I didn’t want her to get ripped off, so I offered to go shopping with her to keep such a thing from happening. Note I didn’t offer to build her one–I’m trying to get out of the build-a-PC-for-a-friend business for the most part.

So we hit Office Depot. The superdupercheap trend seems to be abating a little; there’s a lot for under $1,000 still, but the $499-and-under market is waning. eMachines is playing there, but Compaq and HP seem to have retreated. I noticed plenty of Durons, which ought to make AMD happy.

We also hit Computer Renaissance. I’ve heard horror stories about the place, but figured I could probably handle the slimy salespeople. I can talk way over their heads when I want to (“I don’t care what anyone says, compared to Microchannel, PCI is rubbish. At least with Microchannel, I knew where the resources were going and I knew they’d stay put!”), and I can play intimidation by dropping OS/2 and Linux compatibility questions. They left us alone though, which was nice. I saw P200-based Compaq Deskpros for $199, including 15″ monitor. I wanted more power than that for her. HP Vectra PII266s were $399; PII233s were $379. Both included monitors. What caught my eye was a $299 Compaq Deskpro. It had a Pentium Pro-200, which was about as fast as the PII-233 due to its on-die, full-speed cache, and it had a SCSI hard drive. For productivity use, this Deskpro is fine. Its 32 MB RAM is awfully low, but that’s curable. DIMMs are cheap. The SCSI will be nice. And it’s hard to find a better-built machine than a Compaq Deskpro. Life expectancy of this machine will be much higher than that of a new Compaq Presario, eMachine, or HP Pavilion.

But if mail-order had been an option, I probably would have pushed her in the direction of a Compaq iPAQ. For about $399 (without monitor), you get Windows 2000 and a corporate-quality (as opposed to consumer-quality) PC. Expandability is nil, except for the memory, but for word processing and Internet use, it’s great, and that’s what she wants. And it’s got USB and Ethernet built-in. If I had to equip a small business with a fleet of PCs quickly, that’s probably the direction I’d go. And I like them for home use too.

On to the reviews.

ATA-66 vs. ATA-100 (Real World Tech)

Good methodology, at least as far as hardware selection goes, and he explains his methodology as well. Full disclosure is always good, as it shows confidence you have nothing to hide.

The testing is a little suspect though. Using three trials and taking the highest number isn’t the accepted method. It’s better to take 9 or 10 trials, discard the highest and lowest, and average the remaining scores. I say this because in my own tests, I sometimes get a string of two or three weird scores that are awfully high or low. Running more than that, then discarding the outliers gives scores more likely to reflect the real world.

For these purposes, the flawed method probably suffices; it shows the slight advantage of ATA-66 and ATA-100 over ATA-33, though it may be exaggerated. The tests show little or no advantage to using ATA-100 over ATA-66.

This isn’t the best online test I’ve seen, but it’s definitely not an atrocity either. There is carefully-planned research here, by someone whose experience shows.

Gigabyte GA-7ZXR review (BX Boards)

All I can say is this is a very unremarkable hardware review. They didn’t disclose the testbed setup other than the CPUs used. Benchmarks were limited to Winstone 99 and Quake 2, and then they didn’t list any competing boards, so you’ve got a bunch of numbers but nothing to directly compare them with!

Lots of pictures and a list of features, but frankly there’s nothing here that probably wouldn’t be on the manufacturer’s Web site.

The quality of writing is better than average, but this review’s usefulness is limited to introducing you to a board you may not be familiar with yet. Unfortunately to learn much of anything meaningful about it other than what it looks like, you’ll have to wait for one of the other sites to get their mitts on it.

01/28/2001

I liked how yesterday’s experiment went. So here’s the good stuff I found yesterday.

Laptop intro (Tom’s Hardware Guide)

Aside from spelling errors (notebooks have “gismos,” and PCMCIA network cards connect to CAT5 cable through the use of a “dangle”), this is a pretty good introduction to notebook PCs, covering recent developments like miniPCI and MDC as well and explaining oft-confusing battery technology.

The roundup of video chipsets common in notebooks is nice, and includes the important but easily overlooked power consumption of each solution.

I was disappointed that there was no mention of a previous THG notebook article, http://www4.tomshardware.com/cpu/00q4/001107/index.html , which talked about little-known upgrade paths–by replacing the MMC in a notebook, it’s possible to cross generations. Yes, you can upgrade an old Pentium-based notebook to a P2 or Celeron, assuming you can find an aftermarket MMC.

When you have information like that, there’s nothing wrong with mentioning it whenever another article with similar information gets posted.

These two articles are essential reading if you’re in the market for a laptop, or if your job includes spec’ing and ordering laptops.

EPoX EP-8KTA3 review (AnandTech)

Good discussion of the board’s weaknesses, especially in regards to routing cables and heat dissipation. Heat might be less of an issue if they didn’t assume everyone overclocks, but heat is your PC’s enemy, whether you’re running out of spec or within it. Also good coverage of this board’s special features, including a two-digit diagnostic LCD display on the board. If something goes wrong and it can’t boot, this board will tell you what happened.

Benchmarking is limited to Content Creation, Sysmark, and Quake III Arena under Windows 98, so this is hardly an authoritative evaluation of performance. If you’re into flight sims, racing games, strategy games, or RPG games (let’s face it, first-person shooters aren’t everyone’s thing, and for good reason), Anand’s benchmarks are worthless to you.

This is a decent review, but hardly authoritative. If you’re thinking about buying a KT133A-based Athlon board and you’re considering the EP-8KTA3, you’ll definitely want to look for reviews on another site. You’ll know from reading the KT-133A roundup at THG  that the EP-8KTA3 is a better all-around performer than the Abit K7TA, but you won’t get that from this review.

Mosel Vitelic “PC143” SDRAM (Hardware Daily)

Dangerous, dangerous, dangerous. To wit: “This Mosel Vitelic ram is actually the same as Mushkin Rev2.0 ram. But this one doesn’t have the Mushkin stickers on it and it doesn’t comes with the bubble delivery bag.” Wrong, wrong, wrong. Same chips doesn’t mean same module. Same PCB and same chips doesn’t necessarily mean same module. Here’s the scoop: a 7ns chip may not necessarily run at 7 ns. If a chip runs at 6.9 ns, it’s marked as 7. If it runs at 6.6 ns, it’s marked at 7. If it runs at 7.1, it’s marked as 7.5. What Mushkin’s doing is testing and putting the very fastest 7s on their rev. 3 modules. The second-best go on the rev. 2s. This takes additional testing, which adds to the cost. Buy your Mosel Vitelic memory elsewhere, and you’ll have some 6.6 ns chips and some 7.0s–your results won’t be predictable. One module may run a lot faster than the next. But we’re way ahead of ourselves here.

“According to sisoft Sandra 2001, the chips on this ram is made by Apacer rated at 133mhz.” Wrong again. The reviewer’s hardware knowledge seems as limited as his knowledge of proper English grammar. The chips are made by Mosel Vitelic ( www.moselvitelic.com ), a Taiwanese memory manufacturer who’s been around since 1991 (it was a merger of two companies, each founded in 1983) whose memory is gaining a reputation among overclockers because of its use by Mushkin. Apacer ( www.apacer.com ), on the other hand, makes memory modules.

He then ran some tests in SiSoft Sandra that make this memory look very impressive, but they didn’t do anything to stress-test the RAM to ensure that indeed it was stable at 160 MHz. They also encourage running it at 160 MHz CAS3, which is dubious advice–you get better burst speeds but higher latency that way. That’s precisely the problem with Rambus. How about some benchmarks that more closely resemble real-world performance?

Mosel Vitelic is getting such a reputation that you’ll soon see cheap, generic PCBs with Mosel Vitelic chips on them being sold dirt cheap and bought by misinformed people who read reviews like this and think they’re getting Mushkin-calibre memory for half price.

Mosel Vitelic does make and market their own modules, but that’s not what this is. Manufacturers like Mosel Vitelic and Apacer will be pretty safe, but what you’re paying for when you buy Mushkin is their hand-picking of chips, so you’ll get better, or at least more consistent, results with a Mushkin module.

If you want a near clone of Mushkin memory, you’ll have to look for a module manufactured by Mosel Vitelic themselves (good luck), or by a brand-name maker like Apacer containing 7 ns Mosel Vitelic chips. But you won’t necessarily get the same results.

The review concludes with this: “I highly recommend this ram for people who are looking for good overclocking performance. This teaches us a lesson that good ram isn’t always expensive!”

Unfortunately, the reviewer recommended the wrong thing. The true lesson of this review is that you don’t always get burned when you buy cheap memory, but a few runs of SiSoft Sandra isn’t a good way to test system stability, so this reviewer really doesn’t know what he’s got. He only thinks he does.

01/27/2001

More reviews of reviews. I liked how yesterday went, and I found some really good stuff yesterday, so let’s continue on and see what’s good and why.

2001 Upgrade Guide (Ace’s Hardware)

This is an outstanding upgrade guide, working from the assumption that you have an older system (a K6-2 or Celeron with a TNT2 board, which is a pretty common setup), then they test a number of upgrades so you can see what makes a difference. Unfortunately these upgrade candidates already have a modern hard disk and sound card, so they don’t closely simulate a real-world system, but they do isolate the components, so while these upgraded systems will outperform yours, you can see precisely what effect upgrading the video card will have.

For example, you can see right away from their graphs that replacing a K6-2’s TNT2 video card with a GeForce 2 GTS will only improve Half-Life frame rates slightly (up to 25.5 from 22.1), while trading up to a Duron 850 while keeping all the same peripherals increases rates to 51.8 from 22.1. How valuable is that information? I found a GTS card for $229. The same place has a Duron 850/Gigabyte 7ZX-1 bundle for $222. The upgrades cost the same amount, yet one of them increases performance significantly while the other just barely helps. It’s the difference between throwing away $240 and spending $235 wisely (after shipping).

The other great thing about this guide is that it tests more than just first-person shooters. For FPS, DDR gives marginal improvements indeed, but for other types of games, its improvement can be immense. Mercedes-Benz Truck Racing and Formula One 2000, for instance, are faster with a DDR-equipped Duron 850 than it is with a PC133-equipped Athlon 1100.

This guide shows when a GHz+ CPU and new memory technology makes sense, and when it doesn’t, letting you decide when it makes sense to buy the latest and greatest.

Overall: great methodology, nice balance of real-world tests (assuming gaming’s your thang, which it probably is if you read this stuff, since you won’t see much difference between a Celeron 667 and a 1.2 GHz Athlon for office apps). A lot of work goes into guides like this, but it’s worth it. Maybe someday articles like this will be the norm on the hardware sites, rather than the exception. Hey, I can dream, can’t I?

VIA Apollo Pro 266 (THG)

This is an analysis piece combined with a preview of VIA’s Apollo Pro 266 chipset. Good explanation of PC architecture for one who doesn’t understand what the north bridge and south bridge are, plus the benchmarks are using boards you can actually buy, rather than reference designs.

Tom Pabst takes his usual swipes at Rambus, and points out that the Pentium III isn’t really able to take advantage of DDR, as evidenced by its similar performance to Rambus- and PC133-equipped systems. Pabst concludes with an assertion that a DDR Pentium 4 chipset would prove how terrible Rambus really is, since the bottleneck with DDR seems to be the CPU, rather than the memory itself. Unfortuantely, he doesn’t provide anything at all to back up this claim, so he comes off as an anti-Rambus bigot. Has he seen a P4 run with DDR? Maybe he’s under NDA, but if he is, he can at least say, “I can’t tell you why I know this, but DDR chipsets for the P4 will prove how worthless Rambus is,” and it would be better than what he wrote. But his speculation of DDR performance with the P4 and how it will compare is no more valuable than yours.

This article does give the useful information that DDR on the Pentium III probably isn’t worth the bother.

Value Biz PC Guide (Sharky Extreme)

Unusual for hardware sites, good focus on what’s necessary for business. No benchmarks; I’d have liked to have seen illustrations of why CPU speed isn’t as important as, say, disk speed, for business apps. Hardware recommendations are solid, and I’m happy to see they don’t assume businesses overclock. They don’t. I disagree with the $100 CD-R recommendation; you’re better off with a Plextor drive with Burn-Proof, especially since such a drive will allow you to multitask. Since time is money, businesses can’t afford to waste time burning coasters. If a slower, cheaper CPU is necessary in order to afford a better CD-R, then so be it.

Some discussion of when SCSI would be appropriate on the desktop also would have been nice, as SCSI does have its place in the office.

But overall, this is a solid guide. By blindly following its advice, you’ll build a better PC than you’ll get from many of the direct PC vendors.

Internet Connection Sharing (Dan’s Data)

Nice, down-to-earth, and pretty thorough overview of what it takes to share an Internet connection whose primary target is people who are less ambitious than me–an old 386 or 486 running Linux isn’t among the options he presents. I guess he could have titled it “ICS for the Rest of Us.”

This is thorough without getting too bogged down in particulars, and it’s cross-referenced with an outstanding Networking 101 piece by the same author, and weird jargon is cross-referenced with an online dictionary. Some reviews of the various options would be nice, but he gives a good thumbnail sketch of each option’s advantages and drawbacks. The author, Dan Rutter, is a mainstream computer journalist in Australia who seems to have a very high standard for his work.

Definitely bookmark his networking piece, http://www.dansdata.com/network.htm , and if you keep a notebook, print out a copy to put there as well, as it’s an outstanding overview that answers most of the common networking questions like the difference between a hub and a switch. You may find yourself referring back to this one as well, but it’s more specialized and as such, not as generally useful.

His other stuff is useful, well-written, and downright entertaining. Few computer writers are fun to read. Dan Rutter usually is. Many people consider Ace’s Hardware the best of the hardware sites, but I really think Dan’s Data gives Ace’s a big-time run for the money.

01/26/2001

Hey hey! It works! The server was down all day yesterday, which was a shame. I wanted to try a new experiment. So I’ll try it today.

I saw criticism over at Storage Review on Wednesday morning for their critiques of other hardware sites’ reviews. I disagree with this criticism; many of the reviews out there are atrocities, with poor methodology, hearsay, reviewer ignorance, and other shortcomings. Sometimes these reviews are more misleading than the information in the products’ advertising or packaging! I believe Storage Review is well within professional bounds to point out these shortcomings when they find them.

The mainstream media does this all the time. Columnists and editors will criticize the reporting done in other publications. Most newspapers also employ one person, known as the ombudsman, whose job it is to criticize and/or defend, as appropriate, the publication’s own work.

Seeing as the hardware sites out there often do very sloppy work, even compared to the mainstream media, some policing of it is a very good thing.

Then, over lunch, the idea hit me. Why not do some critiquing myself? I’m trained in editorial writing and editing. I have some experience as a reviewer. And I’ve published a fair bit of my own work in the arena of technology journalism–newspaper columns, a book, individual magazine articles, a series… So I’m qualified to do it, even though I’m not the biggest name out there. And that kind of content is certainly more useful than the “this is how my day went” stuff I’ve been posting way too often.

I’m not so arrogant as to assume that the webmasters of these large sites are in my readership and would take my advice. I don’t expect to change them directly. What I do expect to do is to raise people’s expectations a little. By pointing out what’s good and what’s not so good, hopefully I can raise the public consciousness a little, and indirectly influence some of these sites. If not, then at least my readers are better informed than they otherwise would be, and that’s definitely a good thing.

KT-133A roundup (Tom’s Hardware Guide)

This is a roundup of six VIA KT133a boards. Good review overall. It doesn’t get bogged down in three pages of history that tend to look like a cut-and-paste job from the last similar review, unlike some sites. But it does give just enough history to give proper perspective, though it would have been nice to have mentioned it took EDO and SDRAM some time to show their advantages as well–DDR is no more a failure than the technologies that came before. Unusual for Tom’s, this review isn’t obsessed with overclocking either. Lots of useful information, such as the memory modules tested successfully with each board. Inclusion of the DFI AK74-AC, which will never be released, is questionable. I can see including a reference design, but a cancelled commercial board doesn’t seem to make much sense. You can get an idea from its scores why it got the axe; it was consistently one of the bottom two boards in the roundup.

Emphasis was on performance, not stability, but Pabst and Schmid noted they had no compatibility or stability problems with these boards. Stability in benchmarks doesn’t guarantee stability in the real world, but it’s usually a good indication. As tight as the race is between these boards, stability is more important than speed anyway, and since the majority of people don’t overclock, the attempt to at at least mention compatibility and stability is refreshing.

Socket 7 Upgrade Advice (AnandTech)

This is a collection of upgrade advice for Socket 7 owners. This review, too, doesn’t get too bogged down in history, but the mention of fake cache is noteworthy. This was a PC Chips dirty trick, dating back to 1995 or so, before the K6 series. It wasn’t a very common practice and didn’t last very long–certainly not as long as the article suggests.

Lots of good upgrade advice, including a short compatibility list and pitfalls you can expect. Also included are some benchmarks, but it would have been nice if they’d included more vintage chips. The oldest chip included was the K6-2/450, and AMD sold plenty of slower chips. You can’t extrapolate the performance of a K6-2/300 under the same conditions based on the 450’s score.

Also, the rest of the hardware used is hardly vintage–you’re not likely to find an IBM 75GXP drive and a GeForce 2 video card in an old Socket 7 system. Using vintage hardware would have given more useful results, plus it would have given the opportunity to show what difference upgrading the video card and/or CPU makes, which no doubt some Socket 7 owners are wondering about. Testing these chips with a GeForce does demonstrate that a more modern architecture will give better peformance–it exposes the weaknesses of the CPU–but indication of how much a new CPU would improve a three-year-old PC would be more useful to most people. Few people have the delusion that a K6-3+ is going to challenge an Athlon or P3. They just want to know the best way to spend their money.

No deceiving graphics or lack of knowledge here; what’s in this article is good stuff and well written. It’s just too bad the testing didn’t more closely resemble the real world, which would have made it infinitely more useful.

Memory Tweaking Guide (Sharky Extreme)

This is a nice introduction to the art of memory tweaking, and it explains all those weird acronyms we hear about all the time but rarely see explained. Good advice on how to tweak, and good advice on how to spend your memory money wisely. They disclosed their testbed and included the disclaimer that your results will vary from theirs–their benchmarks are for examples only. The only real gripe I have is that the benchmark graphs, like all too many on the Web, don’t start at zero. From looking at the graph, it would seem that Quake 3 runs six times as fast at 640x480x16 than at 1600x1200x16, when in reality it runs about twice as fast. Graphing this way, as any statistics professor will tell you, is a no-no because it exaggerates the differences way too much.

Asus CUSL2C Review (Trainwrecker)

This is a review of the Asus CUSL2C, an i815-based board intended for the average user. This review has lots of good sources for further information, but unfortunately it also has a little too much hearsay and speculation. Some examples:

“Of course, Asus won’t support this [cable] mod and we’re pretty sure that doing it will void your warranty.” Of course modifying the cable on an Asus product, or any other manufacturer’s product, will void your warranty. So will overclocking, which they didn’t mention. Overclockers are either unaware or apathetic of this. In matters like this, assertiveness is your friend–it gives a review credibility. One who is assertive and wrong than is more believable than one who is wishy-washy and right.

“Arguably, Asus provides the best BIOS support in the business. We believe Asus develops their BIOS’s at their facility in Germany.” Indeed, Asus claims to have re-written over half the code in their BIOSes, which is one reason why Asus boards perform well historically. Most motherboard manufacturers make at least minor modifications to the Award, AMI, or Phoenix BIOS when they license it, but Asus generally makes more changes than most. This claim is fairly well known.

I was also disappointed to see a section heading labeled “Windows 2000,” which simply consisted of a statement that they didn’t have time to test under Windows 2000, followed by lots of hearsay, but at least they included workarounds for the alleged problems. Including hearsay is fine, and some would say even beneficial, as long as you test the claims yourself. This review would have been much more useful if they had delayed the review another day and tested some of the claims they’ve heard.

There’s some good information here, particularly the links to additional resources for this board, but this review is definitely not up to par with the typical reviews on the better-known sites.

DDR Analysis (RealWorldTech)

Good perspective here, in that DDR is an incremental upgrade, just like PC133, PC100, PC66 SDRAM, and EDO DRAM were before it. But I don’t like the assertion that faster clock speeds would make DDR stand out. Why not actually test it with higher-speed processors to show how each of the technologies scale? Testing each chipset at least at 1 GHz in addition to 800 MHz would have been nice; you can’t get a P3 faster than 1 GHz but testing the Athlon chipsets at 1.2 would add to the enlightenment. Why settle for assertions alone when you can have hard numbers?

Also, the assertion “And don’t forget, even though things like DDR, AGP, ATA/100 and other advancements don’t amount to a significant gain all on their own, using all of latest technology may add up to a significant gain,” is interesting, but it’s better if backed up with an example. It’s possible to build two otherwise similar systems, one utilizing AGP, ATA-100 and DDR and another utilizing a PCI version of the same video card, a UDMA-33 controller, and PC133 SDRAM, and see the difference. Unfortuantely you can’t totally isolate the chipsets, so minor differences in the two motherboards will keep this from being totally scientific, but they’ll suffice for demonstrating the trend. Ideally, you’d use two boards from the same manufacturer, using chipsets of like vintage from the same manufacturer. That pretty much limits us to the VIA Apollo Pro series and a Pentium III CPU.

And if you’re ambitious, you can test each possible combination of parts. It’s a nice theory that the whole may be greater than the sum of the parts, and chances are a lot of people will buy it at face value. Why not test it?

This reminds me of a quote from Don Tapscott, in a Communication World interview from Dec. 1999, where he spelled out a sort of communication pecking order. He said, “If you provide structure to data, you get information. And if you provide context to information, you get knowledge. And if you provide human judgment and trans-historical insights, perhaps we can get wisdom.”

This analysis has good human judgment and trans-historical insights. It has context. It has structure. The problem is it doesn’t have enough data, and that’s what keeps this from being a landmark piece. Built on a stronger foundation, this had the potential to be quoted for years to come.

01/24/2001

Finished! I finished up the Shopper UK article after straightening out my registration with PowerQuest last night. I left myself wide open for some jokes with my screenshots, and though I’m mad that Partition Magic no longer comes with Magic Mover, the headliner is improved over its previous incarnations. There’s little point in upgrading if you’ve got 4 or 5, but if you’re still putt-putting around with v2 or v3, go for it.

Had a conversation with Steve DeLassus last night too. (Steve was one of the tech reviewers for Optimizing Windows and we’ve known each other for more than 10 years.) He let me in on what I have in store for myself in a few years, we talked PCs a little, and he complained about me not mentioning him on the site much anymore. So now I have. He and I need to get started on a project at some point. Then his dog Buster can destroy it. I tried to talk him into one of those $29 Soyo Celeron boards but he wouldn’t bite. He also reminded me of our arms race, where we each try to accumulate more PCs than the other, and he mentioned that, being a bachelor, I have an unfair advantage because I can put things in unimaginable places and get away with it. Strangely, he didn’t mention the phone-in-the-fridge incident.

And a late dinner with the music director from church. Hence the short shrift today. It’s hard to squeeze an article, a long dinner, a long phone conversation, plus an Office 2000 mass-deployment plan plus sleep into 24 hours and have much left.