Consumer routers drive security professionals like me crazy. I’m happy to say I finally found a router that doesn’t drive me nuts. I want you to buy an Asus RT-AC66U. I’m going to tell you why, and I’m going to tell you how to configure it. Here’s how to set up an Asus RT-AC66U and how to optimize an Asus RT-AC66U.
I see a few misleading articles out there promising to tell you how to scan your router for malware or viruses. Unfortunately they don’t really explain the problem. They also don’t explain the alternative way to solve the problem you want to solve. What you really want to do is clean malware from a router–and viruses too. And that’s something you can do pretty easily. For free.
Yes, that’s right. You won’t have to pay 50 bucks a year for a subscription to keep your router clean.
I get a lot of questions about the DD-WRT firewall. There’s a lot of talk out there that goes deep into theory and advanced firewall usage, but what if you just want to know how to set up your firewall to protect your network and open up a few ports?
Here’s how to set that up.
Note: If you have multiple DD-WRT boxes running as access points like I do, only the one directly plugged into the Internet needs to be configured this way. Disable the SPI firewall on your internal access points.
Windows 10 uses homegroups, but if you have systems that don’t understand homegroups and want to share a Windows 10 printer by UNC (the old school way to share a network printer), it’s not obvious how to go about doing it.
I couldn’t find a way from the GUI, but it’s still possible to share the printer from a command line.
If your router has a USB port and is running DD-WRT, you can turn it into a DD-WRT USB print server. It can still do wireless duty while it allows your computers to print to your wired USB printer over your wired or wireless network. It’s not very intuitive or user friendly, but it works. Here’s how to set it up with Windows 7. Other Windows versions will be about the same.
I set up a DD-WRT router on Charter’s Spectrum broadband, and had a hard time getting it to work. It wouldn’t pull an IP address on the WAN side, or it would pull a 192.168 address rather than a Charter public address.