Resolving an issue with slow Windows XP network printing

There is a little-known issue with Windows XP and network printing that does not seem to have been completely resolved. It’s a bit elusive and hard to track down. Here are my notes and suggestions, after chasing the problem for a couple of weeks.The symptoms are that printing occurs very slowly, if at all. Bringing up the properties for the printer likewise happens very slowly, if at all. An otherwise identical Windows 2000 system will not exhibit the same behavior.

The first idea that came into my head was disabling QoS in the network properties, just because that’s solved other odd problems for me. It didn’t help me but it might help you.

Hard-coding the speed of the NIC rather than using autonegotiate sometimes helps odd networking issues. Try 10 mB/half duplex first, since it’s the least common denominator.

Some people have claimed using PCL instead of PostScript, or vice versa, cleared up the issue. It didn’t help us. PCL is usually faster than PostScript since it’s a more compact language. Changing printer languages may or may not be an option for you anyway.

Some people say installing SP2 helps. Others say it makes the problem worse.

The only reliable answer I have found, which makes no sense to me whatsoever, is network equipment. People who are plugged in to switches don’t have this problem. People who are plugged into hubs often have this problem, but not always.

The first thing to try is plugging the user into a different hub port, if possible. Sometimes ports go bad, and XP seems to be more sensitive to an deterriorating port than previous versions of Windows.

In the environment where I have observed this problem, the XP users who are plugged into relatively new (less than 5 years old) Cisco 10/100 switches do not have this problem at all.

This observation makes me believe that Windows XP may also like aging consumer-grade switches, like D-Link, Belkin, Linksys, and the like, a lot less than newer and/or professional grade, uber-expensive switches from companies like Cisco. I have never tried Windows XP with old, inexpensive switches. I say this only because I have observed Veritas Backup Exec, which is very network intensive, break on a six-year-old D-Link switch but work fine on a Cisco.

I do not have the resources to conduct a truly scientific experiment, but these are my observations based on the behavior of about a dozen machines using two different 3Com 10-megabit hubs and about three different Cisco 10/100 switches.

If you found this post informative or helpful, please share it!

2 thoughts on “Resolving an issue with slow Windows XP network printing

  • October 20, 2004 at 10:38 pm
    Permalink

    One thing to try: In some printer drivers, on the Advanced tab, there is a checkbox that says ‘Process document in computer’. If it is checked, uncheck it. If it is unchecked, check it and see if it makes a difference.

    There also might be a radio button that says ‘Send directly to the printer’ or something like that. Try that radio button and see if it helps.


    Mike Strock
    mike@myhomeoffice.org
    http://www.myhomeoffice.org/ – New pictures of my kids here!

  • November 3, 2004 at 6:05 pm
    Permalink

    I have noticed my winxp box taking longer to spool print jobs over the network in Office products. I turned off background printing and that seems to help.

Comments are closed.