Amana dishwasher not cleaning well? Fix it yourself and save

Last Updated on May 14, 2023 by Dave Farquhar

My Amana dishwasher stopped washing dishes well. If you Amana dishwasher isn’t cleaning dishes well, maybe this will help. And this advice will apply for Amana’s related brands Whirlpool, Kenmore, and Maytag.

First, a disclaimer. Every dishwasher is a little different. My Amana is the cheapest model I could find in 2018. Other dishwashers made by Whirlpool (including Whirlpool, Amana, Maytag, and Kenmore brands) will be similar, but probably not identical. I buy basic appliances because they are easy to fix yourself, and the inexpensive Amana dishwashers are no exception.

Cleaning Amana dishwasher filters

Amana dishwasher not cleaning dishes well
If your Amana dishwasher isn’t cleaning dishes well, the cylindrical filter in the center of this photo is probably the culprit. Twist the filter counterclockwise and it lifts out for cleaning.

My Amana dishwasher has two filters in the bottom. Both of them had become fouled, but one was worse than the other. The cylindrical filter locks in. Turning it counterclockwise unlocks it so you can release it and lift it out. Then you can remove the other filter as well. It just lifts out.

While you’re in there, make sure there’s nothing stuck in the drain. It’s pretty small, but sometimes bits of plastic or tea bags end up where they shouldn’t.

Back to the filters. These become fouled with grease and water deposits over time. Mine was completely fouled with grease. I didn’t take a photo, because nobody wants to look at that. You can just take my word for it.

The flat plastic filter lifts out. Rinsing it in the sink with a sprayer was enough to clean it up.

The cylinder needed more work. I squirted some dish detergent into it, sprayed a little water on it, and let it sit for a few minutes. Then I scrubbed it gently. It needed a couple of rounds of scrubbing and rinsing to dissolve the grease and clear it. If dish detergent won’t clear it, soak it in some vinegar or CLR to remove the mineral deposits.

Cleaning these filters allows the dishwasher to drain better, and also increases water flow. Increased water flow helps the dishwasher to do a better job of cleaning dishes well.

Preventative maintenance if your Amana dishwasher isn’t cleaning dishes well

Amana dishwasher not cleaning properly
Clean the filter periodically with dish detergent and your kitchen sink’s sprayer. Adding vinegar to your rinse cycle can help it stay clean longer.

Taking filters out and cleaning them periodically is good preventative maintenance. How often? More than once every two years, if you’re me. But it really depends how much you use it. We typically do a couple of loads a day. There’s one other thing you can do to keep your Amana dishwasher cleaning dishes well.

To give yourself more time, pour some vinegar into the rinse agent reservoir. The vinegar will help slow down buildup from both grease and mineral deposits and will probably help get the dishes cleaner too. You don’t have to use it every time you run a load of dishes, but it helps if you remember to use it a few times a week. The reservoir is intended for commercial rinse agents, but the active ingredient in those is vinegar, so you can just use vinegar instead and save some money.

The design on this Amana may cause trouble washing dishes but it also prevents a bigger problem. If the grease is collecting on the filter, it’s not collecting in my pipes and clogging them up. I’d rather take out the filter and degrease it every 6-12 months than deal with a clog in my pipes.

So if your Amana dishwasher isn’t cleaning dishes well, try cleaning the filter. Chances are you’ll find after you do that, it will start working like it did when it was new.

If you found this post informative or helpful, please share it!

One thought on “Amana dishwasher not cleaning well? Fix it yourself and save

  • October 31, 2020 at 1:27 pm
    Permalink

    Thank you, especially for the hint about vinegar and final rinses.

Comments are closed.