Disassembling a Lionel 1001, 1060, 8902 or 8302 locomotive isn’t too difficult. The biggest problem is knowing where the three screws are that you have to remove.
These particular locomotives weren’t really designed to be repaired, but there’s some basic work you can do on them with household tools. The 8902 and 8302 locomotives can be cheap sources of a motor for other projects.
Disassembling a Marx 490 locomotive isn’t too difficult, but it’s very different from other Marx locomotives.
Once you take one apart, though, you’ll see why it was designed how it was. It was Marx’s lowest-cost locomotive, and it could be assembled without tools, so the labor costs were minimal.
For that matter you only need one tool to take it apart, and since there’s so little in it that can break–not even a headlight–you can find anything you would need to service it at the nearest hardware store or auto parts store.
I have three storm door handles, much like the one to the right, that were a bit worse for wear. The painted black finish had worn off over time in places, creating an uneven finish of dull black and dull gray. Replacing them would make the house look a lot better in a subtle way, but there was nothing wrong with them–they worked fine, they just looked worn out.
So I repainted them instead of replacing them and saved myself $30.
The best time to paint figures is when it’s over 50 degrees, because the first step is spraying them with a coat of primer, which requires a temperature of above 50 degrees. The problem is that when it’s that warm, that’s when you’re busy keeping up the yard and other stuff. Wouldn’t it be nice if you could prime your figures with something safe to use indoors?
It turns out you can. I’ve searched years for a brushable, non-toxic primer (preferably acrylic and water-based). Such a thing exists; I was just calling it the wrong thing. What you need is called gesso. You can order it online from Amazon or Wal-Mart, or you can buy it in craft stores like Michael’s, Jo-Ann, and Hobby Lobby and use a coupon. If all they have is white, mix some black acrylic paint in with it (which you can get there as well) to darken it. Or mix in any other color you wish.
A coworker called me in a panic on Valentine’s Day. He’d bought some Tamiya model kits for his son, and quickly found they were in over their head. Would I build them for them?
I finally got started today.
It’s the weekend after Thanksgiving. The time of year when nostalgia runs high and ancient toy trains come out of the basement or the attic and get set up again until sometime after the new year.
Well, hopefully they make it that long. Here are some tips for getting old Lionel, American Flyer, Marx, and similar electric trains running again.