I had a DD-WRT router that was dropping a lot of packets. I got a lot of errors and that caused poor playback in Netflix and especially MLB.tv. It wasn’t a bandwidth issue. My wireless network connection was just too noisy. I had to adjust my DD-WRT TX power to fix it.
I probably adjusted it the opposite way you would expect. Read more
My son told me one morning that he’d let his tablet charge overnight, but the battery level was at 60%. I messed around with it, and indeed, it seemed that the battery had lost its ability to charge with the wall charger. Here’s how I fixed it.
If your router has a USB port and is running DD-WRT, you can turn it into a DD-WRT USB print server. It can still do wireless duty while it allows your computers to print to your wired USB printer over your wired or wireless network. It’s not very intuitive or user friendly, but it works. Here’s how to set it up with Windows 7. Other Windows versions will be about the same.
If you replace your wireless router with another one, your Windows machines may give you a red X along with this error message when you try to reconnect: the settings saved on this computer for the network do not match the requirements of the network.
The quickest, easiest fix is to forget the network and reconnect. Here’s how to forget a network in Windows 7, and how to forget a network in Windows 10.
I picked up a couple of refurbished Linksys EA6200 routers this past weekend. For whatever reason, DD-WRT isn’t officially supported on them, though it does seem to be a popular DD-WRT router. A lot of people make the upgrade far more difficult than they need to. With some simple hacks, Linksys EA6200 DD-WRT installation is pretty straightforward.
I came up with an 18-step process that I simplified just as much as I could. Unlike some methods I’ve seen, I don’t have you editing any binary files or creating custom startup scripts.
I set up a DD-WRT router on Charter’s Spectrum broadband, and had a hard time getting it to work. It wouldn’t pull an IP address on the WAN side, or it would pull a 192.168 address rather than a Charter public address.
The other question that came out of my recommended DD-WRT settings was why not filter MAC addresses. I hate to be flip, but MAC address filtering doesn’t help, so why bother?
The reason is because your MAC addresses are broadcast as part of the network traffic, and it’s unencrypted. So your MAC addresses aren’t any secret at all. So it doesn’t do any good. One could argue it doesn’t do any harm. But it adds an extra step every time you put something on your wireless network. Why go to the inconvenience if you don’t gain anything from it?
I got a couple of questions about my recommended DD-WRT settings, but I’m going to start with the question about why not to hide the SSID. It actually turns out that hiding your SSID is bad for you, and makes your security worse. I’ll explain.
I’ve been asked a few times now for my recommended DD-WRT settings, or at least my good-enough settings. I think that’s a great idea, so I’ll walk through how I configure a DD-WRT router. Follow these steps and I can almost guarantee you’ll have the most secure network on your block.
For the purposes of this tutorial, I am going to assume you are configuring DD-WRT as your primary router.