Easy model corrugated or wooden fences for train layouts

If you want model fence for your train layout, there’s an affordable solution sitting in your hardware or home improvement store for providing easy model corrugated or wooden fences for train layouts.

Read more

Another creative source for S gauge figures: Liberty Falls Americana

In the 1990s, there was a brand of collectible village called Liberty Falls Americana, made by a company called International Resource Services and sold in department stores. The figures are stamped “IRS” on the bottom. The product line consisted of porcelain buildings that are close to HO scale, but the figures are pretty close to 1:64 S scale.  Made-to-be-collectibles tend not to hold their value very well, which means they’re still inexpensive today, and not hard to find on Ebay.

Set in the American West in the late 19th century, the figures are passable on a train layout even if your layout is set in a later era. Women in long, formal dresses won’t look out of place near a church, for example. Perhaps there’s a service or a wedding going on. Men in suits and hats work in that setting as well, and men tended to dress much more formally up to the 1950s than they typically do today, so the male figures in suits and hats wandering around the commercial district are perfectly believable on a traditional American Flyer toy train layout.

Then again, if you want Western figures to complement an American Flyer setup featuring a Casey Jones loco, the Liberty Falls figures are the very best thing you’ll find.

Sometimes the figures come painted and sometimes they’re just stained pewter. If you can score some painted figures, of course, they can go straight to the layout. Painting unpainted figures can be part of the fun too.

Creative sourcing for O and S scale train layout figures

Hobby shops frequently carry a decent selection of figures for O and S gauge layouts, but if you look at the magazines long enough, you start to see almost all of them have the same figures–and they’re probably the same figures the shop near you sells as well.

There are ways to get a better variety of figures so your layout can have something distinctive about it–and the good news is you can save some money doing it as well.

Read more

Tips for using Dept. 56 and Lemax-type buildings with Lionel trains

Tips for using Dept. 56 and Lemax-type buildings with Lionel trains

A frequent question I see regards the proper scale of snow village-type buildings, like Department 56 and Lemax, and whether they’re suitable for use with Lionel electric trains.

The answer is that their scale varies, but the buildings work very effectively with traditional Lionel trains, or, for that matter, 1:64 S scale American Flyer trains. Many hobbyists have built elaborate winter-themed layouts using these buildings. Typically the scale runs from anywhere from 1:64 to 1:48, with lots of selective compression to make the buildings fit an approximate footprint. The very same thing is true of the Lionel trains of the 1950s, so, intentional or not, they end up being a pretty good match.

The figures sold with these buildings, on the other hand, tend to be much larger–very close to 1:24 scale. This discrepancy bothers some people more than others. 1:24 figures are better suited for G scale.

Read more

Miniature buildings find at Michael’s

I found a few plaster buildings at Michael’s (the crafts chain) this week. The size would work for O27, S scale (1:64), or 28mm scale. They included a diner, a pet store, a post office, and a church. They come unpainted, but would paint easily with acrylic paints. They were priced at $4.99.

How to attach trucks to Lionel train cars with screws

Frequently the trucks (the wheel/coupler assembly that sits under train cars) come unattached. Lionel trains from the 1970s and first half of the 1980s are especially prone to this, though other makes of trains aren’t immune either. And sometimes you just want to change the trucks–some Lionel and Marx O27 cars are just the right size for American Flyer S scale, for example, only the trucks are the wrong gauge.

It’s tempting to try to just re-attach them with a nut and bolt, but as the train runs in circles around the track, the nut loosens and eventually works its way out.

The key is all in the type of nut you use.

Read more

2011 retail tinplate finds, at Big Lots and Shack

If you’re a tinplate fan like me, it would behoove you to make a trip to Big Lots sometime this week. Big Lots has a selection of building-shaped cookie tins priced at $5 each. The buildings include a town hall, post office, bakery, and general store. Additionally, my old friend Radio Shack is selling a building tin full of AA and AAA batteries for $10 until December 10 (it’ll be $20 after that).
Read more

Can you use 1:64 vehicles with HO scale trains?

Can you use 1:64 vehicles with HO scale trains? It’s a common question. The answer is you can do whatever you want.

The next question is whether you’ll be happy with it. And under some circumstances, you might be.
Read more

Frequent questions about setting up toy trains and trains and Christmas trees

Here are some train-related questions I’ve received that I really don’t think I ever answered adequately elsewhere. Hopefully this will help. Read more

Cars for trains

Vehicles are a frequent topic of discussion on the various O and S gauge train forms. At times these discussions can get rather heated.

Since use on train layouts is rarely the objective of the companies making various diecast vehicles, there’s no true right answer to what one should or shouldn’t use. This is my personal philosophy. Take it for what it’s worth.

I run prewar and postwar Lionel and Marx trains on my layout, primarily. Most of them are undersize O27; I only have a handful of American Flyer cars that might perhaps approach proper 1:48 O scale.

Prior to the early 1970s, Lionel paid no particular attention to scale. Therefore I see little need to break out the scale ruler and be anal retentive about what vehicles will and won’t go on my layout. A Lionel 6014 Baby Ruth boxcar is very close to 1:64 scale, although it’s riding on trucks that are very close to 1:48. The famous Lionel 6464 boxcars are about 1:55 scale. Marx had a whole line of 1:64 scale O gauge trains; its cheaper plastic cars are also very close to 1:64. Some of its “deluxe” cars were closer to 1:60–somewhere in between the Lionel 6014 and 6464 in size. Maybe making them bigger than the 6014 for about the same price made them seem to be a better value for the money.

And for that matter, while A.C. Gilbert’s American Flyer division paid more attention to scale, Gilbert wasn’t shy about shipping off-scale stuff with the American Flyer name on it either. The trains themselves were pretty close to scale, but many of the accessories and buildings were too large or too small.

Needless to say, it doesn’t bother me then that a Matchbox VW Beetle is 1:55 scale but a Matchbox model of a larger vehicle, say a ’57 Chevy, will be 1:64 or perhaps even a bit smaller. If it’s the right era, I’ll use it.

Besides, park any of them outside a Plasticville house, and it’s clear to anyone that it’ll fit inside that garage. Therefore, it will look believable.

I do pay attention to era. Even a casual passer-by can tell the difference between cars from various decades. And I do think era sets the tone of a layout, so I draw my line at 1949. Postwar fans have it easier, as there are tons and tons of great vehicles from the 1950s and 1960s available. Since I stick to pre-1950, generally speaking I can only count on each manufacturer of Hot Wheels and Matchbox type cars offering one or two vehicles per year that I can use. If I drew the line later, I could probably find a couple dozen cars per year to buy.

Many cars have to be modified to suit my purposes, since I want everyday city street scenes, not a hot rod convention. In the case of the Hot Wheels ’32 Ford Delivery sedan I picked up at Kmart tonight (along with baby formula and a cordless phone–you gotta love it), the car is pretty tame. No jacked up wheels, no overly funky colors. It does have flames. Remove the flames with some nail polish remover or purple cleaner on a cotton swab, and I can probably pass it off as stock to a casual observer. Other times, it’s necessary to drill out the rivets on the bottom, swap out the wheels for more conservative ones, and maybe even strip and repaint the vehicle.

According to a car buff on an S gauge board I read frequently, prior to WWII cars tended to be painted dark shades of green, brown, blue, red, and black. Fenders might be a different shade of the body color. After WWII, the colors lightened up and two-tone paint jobs became popular.

The need to swap wheels means sometimes you have to buy cars just to get their wheels. So I’ll look for cheap vehicles with conservative-looking wheels to use as donors. This adds cost, but consider some people pay $20 and up for each vehicle on their layout. Compared to that, it’s still cheap.

Some people get irritated at having to modify vehicles before using them on the layout. It doesn’t bother me all that much. I think it’s part of the fun, and the result is that I have vehicles that don’t look like anyone else’s.