I’ve talked before about replacing a power cord on a transformer, but for whatever reason, I forgot to mention a cheap source of replacement power cords that also provide a safety improvement.
Use a 3-prong computer power cord.
I was trying to install some software last week and I got an NSIS error like the one to the right. The message certainly suggests corrupt downloads, but corrupt downloads are relatively rare, and when they happen, redownloading it ought to clear that up. Getting two of these failures in a row with different programs is really a freak occurrence, so I started looking for another problem.
A frequent question I see is why the Lionel bulbs in any given accessory burn out quickly. I can sum up both the problem and the solution in a single word: voltage.
When you have too much voltage, bulbs burn out quickly–sometimes in minutes. When you have too little voltage, the bulbs will last decades.
The Digiland DL718M tablet is an inexpensive (sub-$40) tablet sold at consumer electronics stores like Best Buy. Make no mistake, it’s a basic tablet for basic needs. But given reasonable expectations you can buy one of these and be happy with it.
This isn’t a new market by any stretch. But it seems like tablets in this price range are usually Black Friday specials, or only available on online marketplaces far abroad. The Digiland DL718M is one you can get today if you want.
Is rental property a good investment? It certainly is if you do it right.
Here’s what you need to know.
Disassembling a Lionel 1001, 1060, 8902 or 8302 locomotive isn’t too difficult. The biggest problem is knowing where the three screws are that you have to remove.
These particular locomotives weren’t really designed to be repaired, but there’s some basic work you can do on them with household tools. The 8902 and 8302 locomotives can be cheap sources of a motor for other projects.
A frequent question I read is how to attach tin accessories, such as Marx light posts and light towers, to a layout in a semi-permanent but reversible manner. I have found a way to do this, and as a bonus, it also makes it easy to hide the wires that are feeding the lights and makes the wiring simpler.
The Marx 408 street lights are difficult to disassemble. They aren’t difficult because they’re complicated, because they’re not. But it takes a bit of coordination and more than a lot of brawn to get them apart.
But if you need to rewire or repaint one, you don’t have a lot of choice, so here’s how it’s done.