The low-effort fix for a Marx motor

The low-effort fix for a Marx motor

I had a Marx motor that wouldn’t run, and I fixed it with almost no effort. If you need to get a Marx motor running again but can’t put a lot of time and effort into it, I’ve developed a quick fix. It’s only temporary, but if you want to run trains today instead of fixing them, it can get you out of a pinch.

You need a screwdriver and one drop of Rail-Zip.

Read more

Fixing track that gets hot at the track joints

I saw a question about a Fastrack layout getting hot at a track joint. That’s a conductivity issue causing voltage drop, which in turn causes the heat. While not likely to be dangerous, it’s a sign of inefficiency and can lead to other problems, such as the train slowing down at some parts of the layout. Poor conductivity also causes motors to run hotter than they should, which can eventually damage the armature.

I can think of two fixes, none of them especially expensive or time-consuming. And although this question was about Lionel Fastrack, it can happen with other makes of track too, and even other scales.
Read more

Fixing Lionel locomotives that run erratically and have flickering lights

If you have a Lionel electric train whose lights flicker and (possibly) runs erratically, I have an easy fix.
Read more

Fix or restore Lionel track

Fix or restore Lionel track

It’s that time of year again. Time to get that old Lionel (or Marx or American Flyer) electric train running before the holidays sneak up. More often than not, the track isn’t in the best of shape. Fortunately, it’s not all that hard to fix or restore Lionel track.

Believe it or not, you can effectively remove rust from old Lionel track with a ball of aluminum foil. A small ball of aluminum foil plundered from your kitchen and five minutes of your time is likely to be enough to restore a loop of Lionel track from rusty, unusable junk to reliable operation.

Read more