I got a couple of questions about my recommended DD-WRT settings, but I’m going to start with the question about why not to hide the SSID. It actually turns out that hiding your SSID is bad for you, and makes your security worse. I’ll explain.
Mariott wants to jam wi-fi signals. They claim it’s for security reasons, but really it’s so they can gouge guests by charging them for wi-fi instead of using wi-fi hotspots. The security claims are pure bunk.
The truth is that hotel wi-fi networks are generally horrendously insecure, so it’s really better to avoid using them if you can.
On Slashdot, a newcomer to the IT field asked a really good question: What do you do to avoid seeing things you’re not supposed to see?
Clearly, some people do it better than others, but it seems to me it’s a fact of life that eventually you will see things you’re not supposed to see. How you handle it is the bigger problem. Read more
I’ve said before how to eliminate wifi dead spots, but perhaps I didn’t give it the focus it deserves. I think almost everyone has wifi dead spots in their house that they would like to eliminate. It turns out you can do it, and it doesn’t have to cost a fortune either.
The idea is to supplement your existing router with one or two additional access points. Read more
On Monday morning, before I’d finished my first cup of coffee, my three year old ran in with an armful of stuffed animals and informed me the family dog had given birth to three puppies, a bunny rabbit, and a monkey.
He doesn’t seem to grasp biology just yet, because later he said, “When I was a bird, I was so cute!” Read more
The TP-Link TL-WR841N (and the similar TL-WR841ND) is a lower-mid range router that routinely sells in the $20-$25 range. Although many people consider it an off-brand, TP-Link has had a following in the enthusiast community for a couple of years. I’ve been prone to recommend them because they have a better track record than many of the bigger-name brands of continuing to release firmware upgrades that fix security vulnerabilities. If you’re going to buy a router and leave it stock, you’re better off with a TP-Link than anything else.
I found a couple of old Linksys WRT54G routers and decided to load DD-WRT on them. The first one, an abandoned-by-Linksys WRT54GS model, gave me some trouble, which led me to buying a TP-Link unit to run DD-WRT on. The second unit, which was a vanilla WRT54G, still had firmware available on Linksys’ site, so the upgrade was somewhat straightforward–it went by the book, at least. I installed the latest Linksys firmware, then installed the DD-WRT mini build, then upgraded to the full build.
After getting DD-WRT running on it, I configured it to behave as an access point on channel 6. I was surprised at how strong the signal was. Years ago, I ran a pair of WRT54G routers, and they struggled to cover the house. It’s possible that was due to age, or perhaps I was getting too much interference from my neighbors since we were probably all running our wireless on the default channel in those days because none of us knew better.
As for my WRT54GS, when I tried to upgrade it, I got a nice message stating, “Upgrade are failed!” Nice. Too bad it didn’t add “All your base are belong to us.” That’s when I learned you need to install the last Linksys upgrade first, then upgrade from that. So I downloaded that from some forum, tried flashing that, and received the same message. So I set it aside, figuring I bricked the unit. A few days later, after getting the WRT54G running, I fired up the GS, visited its configuration page, and… found DD-WRT running on it! Upgrade are failed? More like all your upgrade are belong to ME.
In all honesty, I probably got lucky. It’s always best to go by the book on things like this.
The WRT54G is limited, of course, to 802.11b and 802.11g (54 megabits max) but as a complement to a more modern router, it still has a few tricks left. If you have one laying around, it won’t cost anything aside from about 30 minutes’ worth of effort to load DD-WRT on it and see what it can still do for you.
And if you don’t happen to have one laying around, it’s not hard to find a used WRT54G. I find them at estate sales, garage sales, and rummage sales pretty frequently because a lot of people set them aside when they either buy newer, faster routers or their ISP forces them into an all-in-one unit. Don’t pay too much for it, because it’s aging technology, but I’d say they’re worth grabbing for $5 or less.
There’s an addition on the back of our house, probably added in the 1970s or 80s, where the wi-fi reception is exceptionally poor. Something about the walls makes it tricky, and I also suspect we get some interference from the neighbors behind us.
My project to fix that began with a TP-Link TL-WR841N router. It’s inexpensive–frequently available for around $20–has a good enough reputation for reliability, and if you dig deeply enough, you can find a DD-WRT build for it. There are fancier routers available, with more antennas and gigabit ports, but this one would take care of my immediate needs while I wait for 802.11ac. I don’t have any 802.11ac-enabled equipment yet, so I’ll wait for the price to come down before adopting it.
I covered the upgrade process yesterday.
Early Monday morning, a fire broke out a couple of streets over from me. Sadly, there was one casualty, a seven-year-old second grader who attends the same school as my oldest son. His older sister heroically came and got him and tried to lead him out the front door, but they became separated and he lost his way.
The paper noted that there have been a large number of fires with fatalities in my area in this past year. It did not speculate on the reasons, but I think I know why.
I think inadequate smoke detectors have a lot to do with it. Read more