Tag Archives: ID

Windows 10 can’t connect to this network – solved

After upgrading to Windows 10, when I unhibernated my laptop the next morning, my wifi connection didn’t work. Forgetting the network and reconnecting didn’t help–I’d get the message that Windows 10 can’t connect to this network.

The problem seemed to be in the power management.

Continue reading Windows 10 can’t connect to this network – solved

Types of Lionel knuckle couplers

There have been three major types of Lionel knuckle couplers produced since resuming train production in 1946. Lionel knew it would have to make a splash when it brought its trains back after the end of the War, and the knuckle coupler was one of the keys.

Two of these coupler types are compatible with one another, but one has a gotcha.

Continue reading Types of Lionel knuckle couplers

A scammer called me a fraud

Someone I know got a tech support scam popup that said their computer was being hacked. I said to bring the computer over. I wanted to see it.

I found the malicious site in the browser history–I’ll tell you how to do that after I finish my story–and pulled the page back up. The computer played an MP3 file with a scary-sounding message and urged me to call an 888 number. So I called. I got voicemail. I left a message.

Continue reading A scammer called me a fraud

Replace missing Lionel brakewheels with sew-on snaps

I saw an old tip recently regarding using sew-on snaps to replace missing Lionel brakewheels. Reproduction brakewheels generally are available, but sew-on snaps work well, are readily available at any store that sells sewing supplies, and they’re cheap.

Continue reading Replace missing Lionel brakewheels with sew-on snaps

Moving SSH off port 22 doesn’t do much for security

A week or two ago, a stranger approached me with some advice about securing routers: move SSH off port 22.

Since arguing with strangers is what the Internet was apparently invented for, I’ll argue against the benefits of moving SSH off port 22.

Continue reading Moving SSH off port 22 doesn’t do much for security

Cleaning electrical contacts with Everclear

When I was 19 or 20, I paid a visit to my old grade school to do some computer repair. My fifth-grade teacher dropped in, saw me cleaning up the contacts on a circuit board, and asked why I wasn’t using Everclear. Cleaning electrical contacts with Everclear is, at least, a practice people talk about a lot.

Well, I couldn’t legally buy Everclear yet, for one thing. But let’s talk about why Everclear is good for cleaning electrical contacts but there are other things that can be better.

Continue reading Cleaning electrical contacts with Everclear

Double-check your security with Qualys Browser Check

In the past, I’ve recommended Secunia PSI as a way to keep your systems up to date. I know from my own experience that it helps, but I also know it doesn’t work 100 percent of the time.

When it comes to security, nothing is more critical than making sure your updates are applying correctly. That’s where my employer comes in, with Qualys Browser Check.

Continue reading Double-check your security with Qualys Browser Check

How to lubricate a Marx motor

I found a video titled How to Lubricate with Labelle, and I thought I would elaborate on how to adapt Labelle’s advice to Marx trains. You don’t have to use Labelle oil and grease necessarily, though I do like their products.

Lubrication is a more controversial topic than it needs to be, but what I find is that when I follow the advice I’m about to present, the train runs cooler, more quietly, with more pulling power, and starts at a lower voltage. All of those are good things. With a single reduction motor, I can pull six of the metal 3/16 scale cars at 7-8 volts. An unlubricated motor might not even start at 7 volts.

Continue reading How to lubricate a Marx motor

Repair a Marx 1209 transformer

Want to repair a Marx 1209 transformer? There are two schools of thought. One is that small, sub-75 watt transformers aren’t worth fixing because they are so cheap. The other is that since they are so cheap, you have nothing to lose by trying.

Marx didn’t design its transformers to be fixed, but the design is extremely simple. The hardest part really is getting the case apart and then getting it back together. If Marx had designed them to be serviced, like its competitors did, they would have cost more, so we wouldn’t have as many Marx trains to enjoy today. So it’s easy enough to forgive Marx for this.

Let’s dive in.

Continue reading Repair a Marx 1209 transformer

Sakai trains: The “Japanese Marx”

Sakai trains were made in HO and O gauge by a Tokyo-based manufacturer and sold abroad, particularly in the United States and Australia after World War II. Sakai’s O gauge product bore a curious resemblance to Marx. I have read speculation that Marx once used Sakai as a subcontractor, and Sakai used the tooling to make its own trains rather than returning it to Marx, but there are enough differences that I don’t think that’s the case.

What I do know is that Sakai’s O gauge product was a curious blend of cues from Lionel and Marx and the trains worked pretty well. They’re hard to find today, but not especially valuable since few people know what they are. They turn up on Ebay occasionally.

Continue reading Sakai trains: The “Japanese Marx”