Tag Archives: connect

Windows 10 can’t connect to this network – solved

After upgrading to Windows 10, when I unhibernated my laptop the next morning, my wifi connection didn’t work. Forgetting the network and reconnecting didn’t help–I’d get the message that Windows 10 can’t connect to this network.

The problem seemed to be in the power management.

Continue reading Windows 10 can’t connect to this network – solved

New computer, old monitor

New computer, old monitor: I see questions fairly frequently about using a new computer and older monitor together. More often than not, it’s possible to do, but you may need to know where to look for the cables and adapters you’ll need.

Here’s some help.

Continue reading New computer, old monitor

Share a Windows 10 printer by UNC

Windows 10 uses homegroups, but if you have systems that don’t understand homegroups and want to share a Windows 10 printer by UNC (the old school way to share a network printer), it’s not obvious how to go about doing it.

I couldn’t find a way from the GUI, but it’s still possible to share the printer from a command line.

Continue reading Share a Windows 10 printer by UNC

How to disassemble a Lionel 1001, 1060 or 8902 locomotive

Disassembling a Lionel 1001, 1060, 8902 or 8302 locomotive isn’t too difficult. The biggest problem is knowing where the three screws are that you have to remove.

These particular locomotives weren’t really designed to be repaired, but there’s some basic work you can do on them with household tools. The 8902 and 8302 locomotives can be cheap sources of a motor for other projects.

Continue reading How to disassemble a Lionel 1001, 1060 or 8902 locomotive

What to check when Lionel Magne-Traction doesn’t work

In the 1950s, Lionel started putting magnets in the axles of some of its trains to increase their pulling power and help the trains stay on the track as they highballed around tight O27 and O31 curves. They called this feature Magne-Traction.

In time Magne-Traction was replaced with rubber traction tires, but needless to say, if your locomotive has Magne-Traction, you probably want it to work. Here’s how to make sure it works.

Continue reading What to check when Lionel Magne-Traction doesn’t work

Disassemble a Marx 408 street light

The Marx 408 street lights are difficult to disassemble. They aren’t difficult because they’re complicated, because they’re not. But it takes a bit of coordination and more than a lot of brawn to get them apart.

But if you need to rewire or repaint one, you don’t have a lot of choice, so here’s how it’s done.

Continue reading Disassemble a Marx 408 street light

The common post on the Lionel 1025 transformer

Lionel produced several 35- and 45-watt transformers through the years, including the 1010, 1025, 1015, and 1016. Lionel MPC produced a similar 4045 transformer in the 1970s. They’re small, but cheap when you can find them, and can be useful when you string them together with other transformers. The problem is the markings don’t tell you what you need to know in order to do that.

Continue reading The common post on the Lionel 1025 transformer

The common post on a Marx transformer

When you want to phase transformers, it’s good to know the common (in Lionel terms) or base (in American Flyer terms) post. It’s a shame that Marx didn’t label which of its posts was common. So here’s how to find the common post on a Marx transformer.

It’s a good thing this is fairly easy to figure out, because Marx transformers are dirt cheap. I bought one for exactly one dollar at the last train show I attended, and the vendor wanted to sell me a box full of them for $5.

Continue reading The common post on a Marx transformer

Linksys EA6200 DD-WRT installation

I picked up a couple of refurbished Linksys EA6200 routers this past weekend. For whatever reason, DD-WRT isn’t officially supported on them, though it does seem to be a popular DD-WRT router. A lot of people make the upgrade far more difficult than they need to. With some simple hacks, Linksys EA6200 DD-WRT installation is pretty straightforward.

I came up with an 18-step process that I simplified just as much as I could. Unlike some methods I’ve seen, I don’t have you editing any binary files or creating custom startup scripts.

Continue reading Linksys EA6200 DD-WRT installation